HP StorageWorks XP10000 Disk Array Owner's Guide (AE102-96013, March 2008)

SpecificationFeature
120 in one rack, 240 in two racksMaximum hard disk drives
16Maximum spare disk drives
59Maximum parity groups/array
69.2 TBMaximum disk drive capacity
64 GBMaximum cache
73 GB 15,000 RPM FC
146 GB 10,000 RPM or 15,000 RPM FC
300 GB 10,000 RPM or 15,000 RPM FC
400 GB 10,000 RPM or 15,000 RPM FC
Available hard disk drive
6 GBMaximum shared memory
1 pairMIX pairs
1 pair, available in FC, iSCSI, NAS, FICON, ESCONCHIP pairs
48 FCMaximum host ports
RAID 1 (2D+2D or 4D+4D)
RAID 5 (3D+1P or 7D+1P)
RAID 6 (6D+2P)
RAID level
1
16,384 for OPEN systems; 65,536 for mainframes (OPEN system
LDEVS must be in first 16K; mainframe LDEVS may occupy any
part of the available range.)
Maximum LDEVs
49,152Maximum LUNs
1024Maximum LUNs per port
1
Mixed RAID levels are supported in a disk unit.
Specifications are subject to change without notice. Contact HP for the firmware required to achieve
the maximum number of LDEVs.
Supported operating systems
The disk array supports the following operating systems:
• HP-UX
• Linux
• Windows
• HP OpenVMS
• HP Tru64
• Sun Solaris
• IBM AIX
• Novell NetWare
• SGI IRIX64
Overview of the HP XP10000 Disk Array16