HP StorageWorks XP Disk Array Configuration Guide (T5278-96047, May 2011)
Table Of Contents
- XP Disk Array Configuration Guide
- Contents
- 1 Overview
- 2 HP-UX
- Installation roadmap
- Installing and configuring the disk array
- Installing and configuring the host
- Connecting the disk array
- Configuring disk array devices
- Verifying the device files and drivers
- Creating the device files
- Creating the physical volumes
- Creating new volume groups
- Creating logical volumes
- Creating the file systems
- Setting the I/O timeout parameter
- Creating the mount directories
- Mounting and verifying the file systems
- Setting and verifying the auto-mount parameters
- 3 Windows
- 4 Novell NetWare
- 5 NonStop
- 6 OpenVMS
- 7 VMware
- 8 Linux
- 9 Solaris
- Installation roadmap
- Installing and configuring the disk array
- Installing and configuring the host
- Connecting the disk array
- Configuring disk array devices
- Configuring for use with Veritas Volume Manager 4.x and later
- 10 IBM AIX
- 11 Citrix XenServer Enterprise
- 12 Troubleshooting
- 13 Support and other resources
- A Path worksheet
- B Path worksheet (NonStop)
- C Disk array supported emulations
- D Using Veritas Cluster Server to prevent data corruption
- E Reference information for the HP System Administration Manager (SAM)
- F HP Clustered Gateway deployments
- Glossary
- Index
Removable Disk Management *1
System Backup Manager
4. Select Add / Change / Show / Delete File Systems.
Example
File Systems
Move cursor to desired item and press Enter.
List All File Systems
List All Mounted File Systems
Add / Change / Show / Delete File Systems
Mount a File System
Mount a Group of File Systems
Unmount a File System
Unmount a Group of File Systems
Verify a File System
Backup a File System
Restore a File System
5. Select Journaled File System.
Example
Add / Change / Show / Delete File Systems
Move cursor to desired item and press Enter.
Journaled File Systems
CDROM File Systems
Network File System (NFS)
Cache Fs *1
6. Select Add a Journaled File System.
Example
Journaled File System
Move cursor to desired item and press Enter.
Add a Journaled File System
Add a Journaled File System on a Previously Defined
Logical Volume
Change / Show Characteristics of a Journaled File System
Remove a Journaled File System
Defragment a Journaled File System
7. Select Add a Standard Journaled File System.
Example
Add a Journaled File System
Move cursor to desired item and press Enter.
Add a Standard Journaled File System
Add a Compressed Journaled File System
Add a Large File Enabled Journaled File System
8. Select a volume group, and press Enter.
Example
Volume Group Name
Move cursor to desired item and press Enter.
rootvg
vg01
112 IBM AIX