HP StorageWorks Remote Web Console error codes for XP12000/XP10000 Disk Arrays and SVS200 (AE002-96034, October 2007)

Part
Code
Error
Number
Error M essage
Recommended Ac tion
Severit y
Level
Failure
Level
3005
5847 3
An error occurr ed when
setting the Pool. Please
confirm the error message
of the logical volume(s) set
as a Pool-VOL of the Pool.
Please confirm the error
message of the logical
volume(s) set as a Pool-VOL
of the Pool.
E
6
3005
58474
The capacity of s hared
memory is insufficient or an
error occurred during SVP
processing.
Please check the amount
of free space in Pool
management block in the
Pool window. Please install
additional shared memory if
thefreespaceisinsufficient.
Please call technical support
if the capacity of shared
memory is not insufficient.
E
6
3005
58475
The PCB for fibre port or
iSCSI port is not installed.
Install t
he PCB for fiber port
or iSCSI p
ort and retry the
operatio
n.
E
6
3005
58491
A communication time-out
error occurred in the
subsystem. Please wait for
a while, and then retry th e
operation.
If this problem persists, call
technical support.
E
3
3005 5857 0
V-VOL management area is
being used.
Delete the XP Snapshot
pair(s) , and then retr y the
operation.
Delete the XP Snapshot
pair(s), and then retry the
operation.
E
6
3005 58571
The specified operation
cannot be executed because
the Pool-VOL is not mounted.
Please check the Pool-VOL
setting.
E
6
3005 5857 2
An error occurred during
the communication with
the subsystem. Please wait
for a while, and retry the
operation.
If the error occurred
in the operation of the
pool, please initialize the
V-VOL management area,
refresh the configuration by
selecting [All Refresh], and
then retry the operation.
If this problem persists,
please call technical
support.
E
6
3005 5857 3
This function is not
supported.
Check the DKCMAIN
microcode version and
the SVP microcode version
because these versions
might be mismatched.
E
3
3005
58574
An error occurred while
connecting to the subsystem.
Please wait for a while, and
then retry the operation.
If this problem persists, call
technical support.
E
6
3005 58575
An error occurred while
connecting to the subsystem.
Please wait for a while, and
then retry the operation.
If this problem persists, call
technical support.
E
6
Remote Web Console error codes
143