HP StorageWorks Disk Array XP operating system configuration guide for IBM AIX XP24000, XP12000, XP10000, SVS200, v01 (A5951 - 96047, June 2007)

1 Installing and configuring AIX for the XP
disk array
You and your HP service representative each play a role in installation. Your HP service representative
is responsible for installing the disk array and formatting the disk devices. You are responsible for
configuring the host server for the new devices with assistance from your HP service representative.
Features and requirements
Ask your HP service representative about the latest supported hardware and software.
The disk array has the following features:
• Storage capacity: The capacity for each model is listed below:
XP10000: Up to 240 drives for up to 69.2 TB, 48 FC ports
XP12000: Up to 1152 drives for up to 332 TB, 128 FC ports
XP24000: Up to 1152 drives for up to 332 TB, 256 FC ports
SVS200: Up to 127 TB of external storage, 48 FC ports
• Server support: IBM RS/6000 series, POWERstation, POWERserver, or SP series
• Operating system support: Check with your HP representative for the current OS versions supported
by your XP disk array
Before installing the disk array, ensure the following requirements are met:
• Superuser access: Make sure you have superuser (root) access
• Host Bus Adapters (HBAs): Install HBAs and all utilities and drivers. Refer to the adapter
documentation for installation details
• (Recommended) HP StorageWorks XP Remote Web Console, HP StorageWorks Command View
XP Advanced Edition Software or HP StorageWorks XP Command View with LUN management
feature for configuring disk array ports and paths
• (Recommended) HP StorageWorks XP Array Manager
• (Optional) Check with your HP representative for other XP software available for your system.
Fibre Channel interface
The XP family of disk arrays and the SVS200 support these Fibre Channel elements:
• Connection speeds of 1 Gbps, 2 Gbps, and 4 Gbps (4 Gbps not available for the SVS200)
• Short-wave non-OFC (open fiber control) optical interface
• Multimode optical cables with SC or LC connectors
• Public or private arbitrated loop (FC-AL) or direct fabric attach
• Fibre Channel switches
XP Disk Array Configuration Guide for IBM AIX 11