HP XP7 P9000 Remote Web Console Messages

Table 34 Error codes (part code 03005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
Restore is not in operation, and then retry the
operation.
WCheck the specified volume.The specified volume contains a quorum
disk.
06576703005
WCheck the specified volume.The specified volume includes a remote
command device being used by a mirror
of the journal group.
06579003005
WCheck the setting of the specified volume.The specified volume is not a Thin
Provisioning volume.
06872203005
EContact HP Technical Support.An internal logic contradiction occurred
on the DKC side.
06872303005
WInstall the shared memory.Shared memory is not installed.06872403005
WInstall the additional shared memory for the V-VOL
management area, and then retry the operation.
The specified operation cannot be
performed because there is not enough
06872503005
If the additional shared memory is alreadymemory available on the shared memory
for the V-VOL management area. installed, the capacity of pools and V-VOLs has
reached the maximum. In this case, delete
unnecessary pools and V-VOLs, and then retry
the operation.
WCheck volume capacity for the THP V-VOL.The capacity of THP V-VOL is insufficient.06872603005
WWait a while, then retry the operation.Shared memory is being initialized.06872703005
WRecover the pool, and then retry the operation.The pool is in an abnormal state.06872803005
WRetry the operation after the formatting operation
has completed.
LDEV format is being executed in the
specified volume.
06872903005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
06873603005
WCheck the current configuration of association.The number of Thin Provisioning volumes
that can be associated with a single pool
has exceeded the maximum.
06874803005
WWait for a while, then retry the operation.The storage system is executing the
processing to release the association,
inside.
06875103005
EIf this problem persists, please contact HP
Technical Support.
An error occurred on the DKC side.06876103005
WCheck the specified parity groups.A parity group that is not mounted is
included in the specified parity groups.
06878503005
WCheck the status of the specified parity groups.A parity group that is not blocked is
included in the specified parity groups.
06878603005
WWhen the pool cannot be restored, wait for a
while, click [Refresh] or [Refresh All] on the [File]
Failed to restore the pool. Pool cannot
be restored when it is in following status:
06879703005
menu of the Remote Web Console window, then
check the pool status in the pool window.
• It is taking time for processing
because some blocked parts exist in
the storage system.
If this problem persists, refer to the troubleshooting
section in the Provisioning Guide for Open
Systems.
• The pool volume is blocked.
Part code 03005 95