HP XP7 P9000 Remote Web Console Messages

Table 28 Error codes (part code 01005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid host mode.00102101005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid host mode.00102201005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid Fibre address.00102301005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid Fibre topology information.00102401005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The specified LU path does not exist.00102501005
WCheck the specified contents, then retry the
operation.
LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
00105901005
WFirst, add paths, then click Apply. Next, turn off
the security switch, then click Apply.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
00106101005
WCheck the specified contents, then retry the
operation.
The specified WWN is already in use.00106301005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
You are trying to register the same
WWN that is already registered.
00106401005
WCorrect the specified contents, and request the
setting of the configuration information again.
The specified host name or the host
group name is already registered. (The
00106501005
host name and the host group name
cannot be the same.)
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
WWN number, which is not registered,
is specified. (When deleting, or
changing)
00106601005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
You are trying to register the same host
group number as the already registered
one.
00106701005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The specified host group has not been
registered.
00106801005
WCheck the setting, then retry the operation.The following volumes cannot be
specified when you change the
command device configurations:
00110801005
• Volumes reserved by Auto LUN
• Volumes other than the open-system
volumes (including unmounted
volumes)
• System Disk volume
WCheck the setting(s), then retry the operation.Invalid characters are specified in the
nickname to be used in HOST GROUP
and WWN.
00111001005
66 Messages (part code group 01nnn)