HP XP7 P9000 Remote Web Console Messages

Table 90 Error codes (part code 09605) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
05842209605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
05842309605
ERestore the logical volume.The specified logical volume is blocked.05842409605
WMake the setting to another logical volume.A retention term is set to the specified
logical volume.
05842909605
WRetry a little later.This logical volume is busy.05843409605
WRetry a little later.This logical volume is busy.05843509605
WSee the Data Retention window and check the
following about the logical volume you have
selected:
The access attribute of the logical volume
has already been changed.
05843609605
• The access attribute must be Read/Write
• The logical volume must be able to be
specified as an S-VOL
• You must be able to set a path to the logical
volume using the RAID Manager or Remote
Web Console
• No mode is set using the RAID Manager
WCheck the logical volume configuration, then retry
the operation.
This logical volume is configured as a
command device.
05843809605
WSelect a logical volume whose emulation type is
OPEN-V.
The emulation type of the logical volume
is not OPEN-V.
05844209605
WRetry the operation after the logical volume has
recovered from the blocked status or after the
LDEV has been formatted or shredded.
The specified logical volume is blocked,
or the LDEV is being formatted or
shredded.
05844809605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
05845009605
WCheck the logical volume configuration, then retry
the operation.
This logical volume cannot be selected
because it is used as a volume for
System Disk.
06800209605
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501509605
WVerify the available LDEVs.The setting operation cannot be done
because all LDEVs allocated to the
07651409605
resource group have no access right for
the resource group.
Part code 09605 327