HP XP7 P9000 Remote Web Console Messages

Table 90 Error codes (part code 09605) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00601209605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00602309605
ETry again. If this problem persists, contact HP
Technical Support.
The mistake is found in the set
parameter.
00603809605
WWait a few minutes, then retry the operation.Processing in progress. Please wait for
a while, and then retry the operation.
00650209605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00653309605
WCheck the error factor in the other settings.The setting was not changed, because
there is an error in one or more other
settings.
00653709605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00706009605
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00711109605
ETry again. If this problem persists, contact HP
Technical Support.
This error code is not registered.00731009605
WRetry a little later.An error occurred while connecting to
the storage system. Please retry a little
later.
00800109605
WRetry a little later.A communication time-out error occurred
in the storage system. Please wait for a
while, and then retry the operation.
00800209605
ECheck if the DKCMAIN and SVP microcode
versions are mismatched.
This function is not supported.00810209605
WSpecify an open-system volume.The specified logical volume does not
exist.
00812009605
WRetry a little later.This logical volume is busy.00812209605
ECheck if the DKCMAIN and SVP microcode
versions are mismatched.
This function is not supported.00812309605
WSpecify an open-system volume.This logical volume is a mainframe
volume.
00812409605
WReview LDEV information, then retry.The attribute of the logical volume has
been changed by RAID Manager.
00812509605
WCheck the logical volume configuration, then retry
the operation.
This logical volume is configured as a
command device.
00812609605
ETry again. If this problem persists, contact HP
Technical Support.
A parameter error occurred.00812809605
ETry again. If this problem persists, contact HP
Technical Support.
This error code is not registered.00813209605
ETo change the attribute, please contact HP
Technical Support.
The attribute of this logical volume
cannot be changed to Read/Write.
00813409605
Part code 09605 325