HP XP7 P9000 Remote Web Console Messages

Table 87 Error codes (part code 09110) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
iTo delete the group, click [Yes]. Otherwise, click
[No].
The specified group is registered in the
security group. Are you sure you want
to delete the group?
00908309110
iTo delete the group, click [Yes]. Otherwise, click
[No].
The specified group includes some hosts.
Are you sure you want to delete the
group?
00908409110
iTo cancel the operation, click [Yes]. Otherwise,
click [No].
Do you want to cancel?00910109110
iTo apply, click [Yes]. Otherwise, click [No].Do you want to apply?00910209110
iTo change the group name, click [Yes].
Otherwise, click [No].
The specified group is registered in the
security group. Are you sure you want
to change the name of the group?
00916009110
iTo set up, click [Yes]. Otherwise, click [No].Confirm that the channel path(s) and the
device(s) included in the setting
00933609110
information are set to offline, and then
select [Yes].
WDelete all LDEV groups and register LDEV groups
and Security groups again.
No volume is registered on the LDEV
group because the volume configuration
05653809110
has been changed. Please delete all
LDEV groups and register LDEV groups
and Security groups again.
WSpecify other names.The specified name has already been
used by other LDKC.
06564809110
WTo continue processing, click [OK]. Otherwise,
click [Cancel].
The data has been changed. The settings
will be discarded if you continue the
06566209110
processing. Do you want to switch the
LDKC?
WTo apply the settings forcibly, click [OK].
Otherwise, click [Cancel].
If you execute this operation, the setting
will be executed forcibly.
06902009110
If you apply security to volumes on which
any job is running, the job may end
abnormally.
Are you sure you want to continue this
operation?
Part code 09205
Table 88 Error codes (part code 09205)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00501309205
WIssue a command again.No commands are issued.00503009205
WReduce the number of set demands.The number of issued commands
exceeds the maximum.
00504109205
WInstall the program product.The program product is not installed.00551109205
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00601209205
Part code 09205 321