HP XP7 P9000 Remote Web Console Messages

Table 69 Error codes (part code 08105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCorrect the group name.The group name does not exist.00575208105
WCorrect the port ID and the group ID.There is a difference between the current
port ID/group ID and the specified one.
00575308105
WCorrect the CU and LDEV.The intermediate volume cannot be
specified as a command device.
00575408105
WTurn on the security switch on this port.The security switch on the port remains
off. Turn the switch on.
00575508105
WAdd the WWN to another port.The number of WWN cannot exceed
255 per port.
00575608105
WCorrect the WWN.The same WWN is already registered.00575708105
WCorrect the group ID.No name can be added to the group ID
(00).
00575808105
WCorrect the name.The same name is already registered.00575908105
WCorrect the WWN.The WWN does not exist.00576108105
WCorrect the name.The name does not exist.00576208105
WAdd the LUN to another group or another port.The number of LUN cannot exceed 512
per port or 256 per host group.
00576408105
WCorrect the LUN.The LUN is already used.00576508105
WCorrect the CU and LDEV.The specified CU:LDEV is invalid.00576608105
WCorrect the LUN.The LUN does not exist.00576708105
WCorrect the LUN.There is a difference between the current
LUN and the specified LUN.
00576808105
WCorrect the group ID.The group cannot be added.00576908105
WSet the port attribute to target in advance.The port cannot be changed because
the port is an initiator port.
00577008105
WThe PCB mode value is invalid. Specify a correct
value.
The setting cannot be performed,
because an invalid PCB mode is set to
the specified CHA.
00577108105
WCorrect the CU and LDEV.The system LU cannot be used.00578508105
WCorrect the name of port.The path can be defined only for the A,
E, J or N port.
00578608105
WCorrect the CU and LDEV.The intermediate volume cannot be
specified as a command device.
00578908105
WIf nothing changes despite retrying, please contact
HP Technical Support.
A program error occurred under internal
process.
00579008105
WAll the resource group IDs that are set to the
storage system must be assigned to the user
account that logs in to Remote Web Console.
The setting cannot be done because you
have no access right to the subject
resource group.
00587608105
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00601208105
WIf the same problem persists despite retrying,
please contact HP Technical Support.
The SVP is busy. Please wait for a while,
and then retry the operation.
00602308105
ERetry the operation a little later.A command was double started.00651308105
Part code 08105 303