HP XP7 P9000 Remote Web Console Messages

Table 69 Error codes (part code 08105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
by specifying resources in the same resource
group.
groups cannot be done because the
virtual mode of at least one of the
resource groups is on.
EUse the SVP to check if the DKC is in the normal
status, then retry. If the same problem persists
An error occurred during SVP
processing.
00200308105
despite retrying, please contact HP Technical
Support.
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00200508105
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00200908105
WRecovery processing may take about 1 minute.
Wait for a while.
The LDEV is being used by the host, or
an error occurred in the SVP procedure.
00201008105
EPlease contact HP Technical Support.The status of the storage system requires
maintenance (for example, the storage
00201108105
system is blocked, the shared memory
is inconsistent, or some other factor).
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00201308105
WIf the same error occurs despite retrying, please
contact HP Technical Support.
An error occurred while connecting to
the storage system.
00201508105
EUnmount the host and cancel reservation of the
device. If the host is an AIX host, unmount the
host, and execute the varyoffvg command.
Processing is disabled because the host
is mounted or the device is reserved.
00208208105
WCheck the DKC status and the current status of the
configuration setting. If necessary, re-execute the
setting operation.
Unexpected error occurred. Please
refresh the array configuration. The
storage system status is invalid.
00208308105
WCheck the DKC status and the current status of the
configuration setting. If necessary, re-execute the
setting operation.
Unexpected error occurred. Please
refresh the array configuration. The
storage system status is invalid.
00208408105
WCheck the settings, then retry the operation.The host specified by the WWN is
performing I/O operations.
00209708105
WDelete or suspend all pairs to which the journal
volumes belong.
Devices to be maintained include journal
volumes.
00220408105
WDelete all pairs to which the journal volumes
belong.
Devices to be maintained include journal
volumes.
00220508105
WRelease the reserved attribute of the target volume
by using Data Retention.
No settings can be made because of a
volume reserved for RAID Manager.
00250408105
WPlease contact HP Technical Support and finish
adding volumes.
No path can be set to the specified
volume because the addition of volumes
is not finished.
00251008105
WRelease the pair definition or delete command
devices defined by Business Continuity Manager,
then retry the operation.
One of the following is defined: a
Remote Copy pair, a Continuous Access
Journal pair, or a Continuous Access
Journal Z pair.
00251508105
Alternatively, command devices defined
by BC Manager are included.
300 Messages (part code group 08nnn)