HP XP7 P9000 Remote Web Console Messages

Table 69 Error codes (part code 08105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
You cannot use spaces for the first and
the last characters in the name.
WCheck the setting(s), then retry the operation.When requesting a configuration change
of LUN-Security, a nickname is not
00111108105
specified. Specify the nickname of HOST
GROUP.
WCheck the setting(s), then retry the operation.When registering WWN, the value is
not specified. Or, zero is set as the value
00111608105
of WWN. Be sure to set the WWN
value before requesting the configuration
change.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Command device security cannot be set
to the specified volume because the
volume is not a command device.
00112308105
WThe setting method of command device/command
device security is incorrect. The following settings
An error occurred. If this problem
persists, please contact HP Technical
Support.
00112408105
are invalid. *Set command device + Release
command device security
The command device setting and the
command device security setting are *Release command device + Set command device
securityincorrect. You cannot do any of the
following to the same volume:
The error does not occur normally because it
cannot be modified in the window. In the unlikely
• Specify the volume as a command
device and disable command device
security on the volume.
event that this error occurs, please contact HP
Technical Support.
• Specify the volume as a
non-command device and enable
command device security on the
volume.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
There are no host groups where the
WWN will be registered.
00112508105
WCheck the setting(s), then retry the operation.An error occurred. If this problem
persists, please contact HP Technical
Support.
00112808105
WCorrect the specified contents, and request again.The specified name is the same as the
system default name. Please change the
name.
00113008105
WThe configuration information has been already
changed.
Failed to set the host group because the
number of host groups exceeds the
maximum that can be set in a port.
00113108105
Check the settings, and request the setting of the
configuration information again.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Failed to set the WWN because the
number of WWNs exceeds the
maximum that can be set in a port.
00113208105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Failed to set the host mode because the
number of host modes exceeds the
maximum that can be set in a port.
00113308105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Failed to set the path because the
number of paths exceeds the maximum
that can be set in a port.
00113408105
Part code 08105 297