HP XP7 P9000 Remote Web Console Messages

Table 63 Error codes (part code 07005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WAssociate the Thin Provisioning volume with a
pool, then retry the operation.
The command has been rejected,
because the specified S-VOL is a Thin
06873807005
Provisioning volume not associated with
a pool.
WAssociate the Thin Provisioning volume with a
pool, then retry the operation.
The command has been rejected,
because the specified reserved volume
06873907005
is a Thin Provisioning volume not
associated with a pool.
WRetry the operation after the Quick Format has
completed.
The command has been rejected,
because Quick Format is performed on
the specified P-VOL.
06874307005
WRetry the operation after the Quick Format has
completed.
The command has been rejected,
because Quick Format is performed on
the specified S-VOL.
06874407005
WQuick Restore cannot be executed by the current
pair configuration.
The Quick Restore command has been
rejected, because the specified pair is
06875007005
composed of the Thin Provisioning
volume and the volumes other than Thin
Provisioning volume.
WQuick Restore cannot be executed in the current
pair configuration. Select a pair where the device
The Quick Restore command has been
rejected, because device information
06875507005
information (Inquiry information) is the same, and
execute Quick Restore.
(Inquiry information) of P-VOL and S-VOL
was different in the specified pair.
WWait for a while, then retry the operation.Quick Restore cannot be executed,
because the configuration is being
06876007005
backed up in the target volume. Please
wait for a while, then retry the operation.
WThe operation is not available because the target
volume has capacity changes. Check the capacity
of the volume and retry the setting.
The command has been rejected,
because the specified P-VOL is a Thin
Provisioning volume whose capacity is
being added.
06880807005
WThe operation is not available because the target
volume has capacity changes. Check the capacity
of the volume and retry the setting.
The command has been rejected,
because the specified S-VOL is a Thin
Provisioning volume whose capacity is
being added.
06880907005
WConfirm the capacity of the volume and retry the
setting.
The command has been rejected,
because the specified reserved volume
06881007005
is a Thin Provisioning volume whose
capacity is being added.
WDelete the Continuous Access Synchronous pair,
Continuous Access Journal pair, or External
The Initialize function cannot be
executed, because a Continuous Access
06881407005
Storage Access Manager pair that is using Thin
Provisioning volumes, then retry the operation.
Synchronous pair, a Continuous Access
Journal pair, or a External Storage
Access Manager pair is created by using
Thin Provisioning volumes.
WRelease the Fast Snap or Snapshot pair that is
using the specified P-VOL, and then retry the
operation.
The command has been rejected
because the specified P-VOL is used by
a pair of Fast Snap or Snapshot that is
registered in the CTG.
06883507005
WRelease the Fast Snap or Snapshot pair that is
using the specified S-VOL, and then retry the
operation.
The command has been rejected
because the specified S-VOL is used by
a pair of Fast Snap or Snapshot that is
registered in the CTG.
06883607005
262 Messages (part code group 07nnn)