HP XP7 P9000 Remote Web Console Messages

Table 63 Error codes (part code 07005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WWait until L1 pair becomes PSUS status, then
execute the operation for L2 pair.
Because a L1 pair is not PSUS, you
cannot execute operations for L2 pair.
00892007005
WYou cannot create a pair with these volumes. If
you want to create a pair, you must use the
volumes to both of which VMA is set or not.
The command was rejected because you
tried to create a pair using a volume
with VMA setting by Data Retention and
a volume without VMA setting.
05526407005
WIncrease the licensed capacity of Open System
Array Management, then retry the operation.
You cannot create the pair because the
licensed capacity of Open System Array
Management is insufficient.
05530107005
WUse the Reverse Resync option.Quick Restore cannot be executed
because the specified pair is composed
05564507005
of the external volumes with different
cache mode settings.
WWait, then click [Refresh].The storage system is in internal process,
or some other user is changing the
configuration.
05630107005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
05630207005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
05630307005
EPlease contact HP Technical Support.This function cannot be used by the
storage partition administrator.
05652407005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
05710107005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
05710207005
WSelect a different volume or release the
consistency group setting.
The command has been rejected
because the cascade request for creating
05800007005
cascade pairs composed of volumes
belonging to the same consistency group
was issued.
WWait until the L1 pair status changes to PSUS or
PAIR, then retry the operation.
The operation of the L2 pair failed
because the L1 pair was in
05800107005
COPY(SP)/COPY status,
PSUS(SP)/COPY status or
COPY(RS-R)/RCPY status.
WThe quick restore operation cannot be performed
when the pair is composed of a normal volume
The Quick Restore command has been
rejected because the specified pair is
05800207005
and a customized volume (CV). Select a different
pair.
composed of a normal volume and a
customized volume (CV).
WTo continue the operation, delete the remote copy
pair.
The command has been rejected
because a Remote Copy pair exists in
the same storage system frame.
05800307005
WThe requested operation cannot be performed.
Check the status of the specified volume.
The command has been rejected
because the issued request is an
05800407005
operation that cannot be performed with
a volume that can be used from either
the mainframe or open-system hosts.
WDelete the Remote Copy pair or execute the
operation by other pairs.
The Quick Restore command has been
rejected, because the specified pair
05825907005
258 Messages (part code group 07nnn)