HP XP7 P9000 Remote Web Console Messages

Table 11 Error codes (part code 00110) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
i-Do you want to exit?00910000110
iTo cancel, click [OK].Do you want to cancel?00910100110
iTo execute the operation in Preview, click [OK],
if not click [Cancel].
Do you want to apply?00910200110
i-Do you want to change the mode?00910400110
WTo close the window, click [OK]. To not close the
window, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to exit?
00910500110
WTo change the mode, click [OK]. To not change
the mode, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to change the
mode?
00910600110
WTo continue processing, click [OK]. To stop
processing, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
00910700110
iTo update the status immediately, click [Refresh].The installation status of program
products has been changed. To update
05504500110
the status immediately, click [Refresh] on
the File menu.
EInstall the supported version of JRE.The unsupported JRE version is used.
Install the supported version of JRE, then
retry the operation.
05650300110
EGet back to the Modify mode and change the
configuration again.
Modify mode released due to inactivity.
Another user or service engineer may
05655800110
have changed the configuration while
the Modify mode was released. Get
back to the Modify mode and change
the configuration again. Set the "RMI
time-out period for Modify" by using the
"Set Env." dialog box located on the
Control Panel of the Remote Web
Console to change the time-out period
for Modify mode.
ELog off from Remote Web Console. Then log on
to Remote Web Console again and check whether
configuration changes have been made correctly.
An error occurred regarding screen
display. Please log off from Remote Web
Console. After that, please log on to
05701100110
If configuration changes have been made
correctly, there is no problem.
Remote Web Console again and check
whether configuration changes have
been made correctly.
If configuration changes have been made
incorrectly, retry the operation.
WWait for a while, then click [OK] and change the
mode to Modify.
The storage system is in internal process,
or some other user is changing the
05900200110
configuration. Wait, then click [OK] and
change the mode to Modify. Do you
want to change the mode to Modify
again?
iReply to the message.Succeeded to change the mode to
Modify.
05900300110
iTo refresh all the configuration information, click
[OK]. Otherwise, click [Cancel].
Do you want to refresh all the
configuration information?
05910500110
WReply to the message.An error occurred regarding screen
display. Select the window you wish to
display from the [Go] menu.
06509200110
24 Messages (part code group 00nnn)