HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck the status of the specified M-VOL from the
host or the SVP.
The operation failed because the
specified M-VOL is used as FICON(R)
Data Migration.
06880406505
WCheck the status of the specified R-VOL from the
host or the SVP.
The operation failed because the
specified R-VOL is used as FICON(R)
Data Migration or Data Migration.
06880506505
WSpecify a volume that is not used by FICON(R)
Data Migration.
The specified volume cannot be used as
a journal volume because it is used by
FICON(R) Data Migration.
06881106505
WCheck the volume capacity after the capacity
change of the volume ends, and then plan again
a combination of volumes to form a pair.
A pair cannot be created because the
volume specified as the secondary data
volume is a Thin Provisioning or Thin
06881206505
Provisioning Z volume whose capacity
is being changed.
WCheck the volume capacity after the capacity
change of the volume ends, and then plan again
a combination of volumes to form a pair.
A pair cannot be created because the
volume specified as the primary data
volume is a Thin Provisioning or Thin
06881306505
Provisioning Z volume whose capacity
is being changed.
WThe specified volume runs on the 2DC
configuration in which the Continuous Access
The pair cannot be released because
the specified volume is used as the pair
06881506505
Synchronous or External Storage Access Manager
cooperates.
volume of Continuous Access
Synchronous or External Storage Access
Manager.
Release the pair of Continuous Access
Synchronous or External Storage Access
Manager, then retry the operation.
WWait until the zero page reclamation on the
specified volume is complete, and then retry the
operation.
The operation failed because the volume
specified as the secondary data volume
is a volume of Thin Provisioning or Thin
Provisioning Z in zero page reclaiming.
06884206505
WWait until the zero page reclamation on the
specified volume is complete, and then retry the
operation.
The operation failed because the volume
specified as the primary data volume is
a volume of Thin Provisioning or Thin
Provisioning Z in zero page reclaiming.
06884306505
WWait until the initializing processing is complete
and then retry the operation.
The operation failed because the pool
associated with the volume of Thin
06884806505
Provisioning or Thin Provisioning Z that
is specified as the primary data volume
is being initialized.
WWait until the initializing processing is complete
and then retry the operation.
The operation failed because the pool
associated with the volume of Thin
06884906505
Provisioning or Thin Provisioning Z that
is specified as the secondary data
volume is being initialized.
WSpecify "Mirror" for the [Range], then retry the
operation.
The operation failed, because the
consistency (CT) group of specified data
06885006505
volume was being shared with multiple
primary and secondary storage systems,
and "LU" was specified for the [Range].
WSpecify another CT group, then retry the
operation.
The operation failed, because the
specified consistency (CT) group was
06885106505
shared with multiple primary and
secondary storage systems.
Part code 06505 223