HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck if the specified journal is being used by
other program product you are using.
Journals cannot be added to the
extended consistency group (EXCTG),
05862506505
because the specified journals are being
used by another program product.
WCheck the status of the command device.The specified operation failed because
the command device was not registered
or has been blocked.
05862706505
WCheck the attribute of the journals in the specified
extended consistency group (EXCTG).
Journals cannot be added to the
specified extended consistency group
05862806505
(EXCTG), because different journal
attributes coexist in the EXCTG.
WIf this problem persists please contact HP
Technical Support.
The specified operation failed because
of a temporary path failure. Retry the
05862906505
operation. If this problem persists, please
contact HP Technical Support.
WConfirm whether the specified volume is set by
Cache Residency or Cache Residency Z.
The specified volume cannot be used as
a journal volume because the volume is
05864106505
set by Cache Residency or Cache
Residency Z.
WCheck the DKCMAIN microcode version of
secondary storage system, and contact HP
The operation failed because the
Continuous Access Journal or the
05868306505
Technical Support to confirm whether theContinuous Access Journal Z function of
Continuous Access Journal or the Continuousthe secondary storage system does not
support the Delta resync function. Access Journal Z function supports Delta resync
function.
WCheck the status of the primary data volume in
the Continuous Access Synchronous window or
the Continuous Access Synchronous Z window.
The operation to change the status to the
status ready for Delta resync failed.
The specified primary data volume
should meet the following requirements.
05868406505
• The specified volume is a secondary
data volume for Continuous Access
Synchronous, External Storage
Access Manager, or Continuous
Access Synchronous Z.
• The pair status of Continuous Access
Synchronous, External Storage
Access Manager, or Continuous
Access Synchronous Z is PAIR or
Duplex.
WCheck the following of the specified primary data
volume.
Delta resync operation failed because
the specified primary data volume was
not a data volume of Continuous Access
05868506505
• The volume is an M-VOL of a synchronous pair
or a External Storage Access Manager pair,
Synchronous, External Storage Access
Manager, or Continuous Access
and the pair status is in PAIR or Duplex when
Synchronous Z, or the pair status of the
primary data volume was invalid.
it is referenced from the Continuous Access
Synchronous window, the Continuous Access
Synchronous Z window, the RAID Manager,
or the Business Continuity Manager.
• The volume is an R-VOL of a synchronous pair
or a External Storage Access Manager pair,
and the pair status is in SSWS or Swapping
when it is referenced from the RAID Manager
or Business Continuity Manager.
212 Messages (part code group 06nnn)