HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck whether the specified volume is used by
Parallel Access Volumes.
The specified volume cannot be used as
a journal volume because it is used by
Parallel Access Volumes.
05855306505
EPlease contact HP Technical Support to install
additional shared memory.
A journal volume cannot be added
because the capacity of shared memory
is insufficient.
05856006505
WCheck the timer type of the master and the restore
journal.
The Add Pair operation or the Resume
Pair operation failed, because the timer
05856106505
type of the master journal was different
from the one of restore journal.
WWrite down the volumes that failed to be blocked.
Close the Continuous Access Journal or
The specified volumes or the volumes in
the specified journal were deleted.
05856206505
Continuous Access Journal Z window. Block theHowever, the blockade of the volumes
failed. volumes by using [Block LDEVs] function in the
Logical Device window. If this operation is
unavailable to do, please contact HP Technical
Support.
WIf the problem persists despite retrying, execute
[Format LDEVs].
The specified volume could not be
registered because the volume failed to
recover from blockade.
05856306505
WWait until the shredding of the specified volume
is complete, and then retry the operation.
The Paircreate operation failed because
the volume specified as the primary data
volume is being shredded.
05856406505
WWait until the shredding of the specified volume
is complete, and then retry the operation.
The Paircreate operation failed because
the volume specified as the secondary
data volume is being shredded.
05856506505
WConfirm that the shredding has completed in the
Data Retention window, then retry the operation.
The specified volume cannot be
registered as a journal volume because
05856606505
the volume is being shredded by Data
Retention.
Retry the operation after the shredding
is completed.
WCheck the journal volumes statuses of the specified
master journal.
The operation of Add Pair (Paircreate)
or the Resume Pair (Pairresync) failed,
05859006505
because the journal volumes of the
specified master journal were blocked.
WCheck the journal volumes statuses of the specified
restore journal.
The operation of Add Pair (Paircreate)
or the Resume Pair (Pairresync) failed,
05859106505
because the journal volumes of the
specified restore journal were blocked.
WCheck the status of the storage system. Retry the
operation after the storage system has started.
The specified operation failed because
the storage system was being powered
on or powered off.
05859206505
WWait for a while, and refresh the window.The storage system has accepted the
request normally, however the
05859306505
If this message is displayed after the setting
operation, refresh the window and check that the
processing requires some time. If this
message is displayed after a setting
setting is reflected. If this message is displayed
operation, please refresh the window
after the operation of changing pair status, check
and check whether the setting is
the status of the primary and the secondary data
reflected. If the setting is not reflected
volume. If the settings are not reflected, retry the
operation.
despite refreshing the window, please
retry the operation.
Part code 06505 209