HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WDelete the DKC once, then add the DKC using
the same logical address.
The existing logical addresses are not
the same.
00873106505
WContinuous Access Journal or Continuous Access
Journal Z must be installed in the storage system
Continuous Access Journal or Continuous
Access Journal Z is not installed in the
storage system.
00873306505
when you create a path or a pair for Continuous
Access Journal or Continuous Access Journal Z.
Install Continuous Access Journal or Continuous
Access Journal Z in the storage system.
WContinuous Access Journal or Continuous Access
Journal Z must be installed in the remote storage
Continuous Access Journal or Continuous
Access Journal Z is not installed in the
remote storage system.
00873406505
system when you create a path or a pair for
Continuous Access Journal or Continuous Access
Journal Z. Install Continuous Access Journal or
Continuous Access Journal Z in the remote storage
system.
WCheck the serial number and the controller ID of
this remote storage system and already registered
The serial number or the controller ID of
the remote storage system is incorrect.
00873506505
remote storage systems, then specify the correct
values.
If the specified values are correct, check the cable
connection of the remote storage system. If the
problem persists, please contact HP Technical
Support.
WDelete data volume pairs of the specified remote
storage system. Then delete journals, if any.
The specified remote storage system
contains journals or data volume pairs
for remote copy operations.
00873606505
Ensure that there are no data volume pairs and
journals, then retry the operation.
ECheck the SSB log, then contact HP Technical
Support.
An internal error occurred.00873706505
WCheck the status of the pinned tracks in the
primary data volume, and clear the pinned tracks.
Pinned track(s) exists in the primary data
volume.
00874206505
WCheck the status of the pinned tracks in the
secondary data volume, and clear the pinned
tracks.
Pinned track(s) exists in the secondary
data volume.
00874306505
WCheck whether the primary data volume is in any
of the following conditions:
The specified primary data volume
cannot be used.
00874406505
• Data in the primary data volume is being
copied; correction copy or drive copy is in
progress.
• The primary data volume is in correction
access condition.
• The primary data volume is blocked.
• The primary data volume is being maintained.
• The access attribute of the primary data volume
is Read Only.
WCheck whether the secondary data volume in the
remote storage system, which are connected from
The secondary data volume is already
in use by another system.
00874506505
Part code 06505 191