HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.An internal error occurred.00871406505
WEnsure that the number of paths is correct, then
retry the operation. If the problem persists, please
contact HP Technical Support.
The number of paths is incorrect.00871506505
WCheck the serial number and the controller ID of
this remote storage system and already registered
The serial number or the controller ID of
the remote storage system is incorrect.
00871906505
remote storage systems, then specify the correct
values.
If the specified values are correct, check the cable
connection of the remote storage system. If the
problem persists, please contact HP Technical
Support.
WReduce the number of registered remote storage
systems, then retry the operation.
The number of registered remote storage
systems already reached the maximum
(that is, 64).
00872006505
WCheck the path connections between the local
and the remote storage systems, then retry the
operation.
Path creation has not finished yet.00872106505
WCheck the path connections between the local
and the remote storage systems, then retry the
operation.
Path creation failed.00872206505
WAdd another path, or delete all the pairs in the
remote storage system, and then retry the
operation.
The path edit operation is rejected
because the specified path is the last
path of the remote copy pair.
00872306505
WCheck the number of paths.The specified number of paths is less
than the minimum number specified in
the DKC Option window.
00872406505
WDo either of the following to recover from the
error:
The number of minimum paths exceeds
the number of normal paths.
00872706505
• If the error code is 100c, add normal paths,
then set the minimum number of paths.
• If the error code is 100d, add normal paths,
then delete paths. Alternatively, reduce the
minimum number of paths, then delete paths.
WDo either of the following to recover from the
error:
The number of minimum paths exceeds
the number of normal paths.
00872806505
• If the error code is 100c, add normal paths,
then set the minimum number of paths.
• If the error code is 100d, add normal paths,
then delete paths. Alternatively, reduce the
minimum number of paths, then delete paths.
ECheck the SSB log, then contact HP Technical
Support.
An internal error occurred.00872906505
WDo either of the following to recover from the
error:
The specified logical address is
incorrect.
00873006505
• If you are adding DKCs, specify the same
logical address.
• If you are editing paths, specify the same
logical address as the existing paths.
190 Messages (part code group 06nnn)