HP XP7 P9000 Remote Web Console Messages

Table 57 Error codes (part code 06505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WWait a while, then retry the operation.A communication time-out error occurred
in the storage system. Please wait for a
while, and then retry the operation.
00800206505
ERetry the operation. If this problem persists, please
contact HP Technical Support.
An error occurred during SVP
processing.
00810006505
ECheck whether the DKCMAIN microcode version
and the SVP microcode version are mismatched.
This function is not supported.00810206505
WRetry the operation.Please retry operation.00870006505
WCheck the status of the logical path on the MCU
and that of the logical path and pair on the RCU
The pair operation failed due to one of
the following reasons.
00870106505
on the Pair Operation or DKC Operation window,
and then perform the following operations.
• The logical path between the MCU
and the RCU is invalid.
• If the logical paths are invalid, reestablish the
paths by an Edit Path operation.
• The specified secondary data volume
is in the SMPL status.
• If the secondary data volume is in the SMPL
status, delete the pair from the primary data
volume, and then recreate a pair.
WRefresh and check the window. If possible, retry
the operation on the primary data volume.
The status of the primary data volume is
not valid.
00870206505
WCheck the number of paths.The specified number of paths is less
than the minimum number of paths in
the DKC Option window.
00870306505
WCheck the status of the paths in the DKC Status
window, and then restore the paths.
The specified number of paths is less
than the minimum number of paths
00870406505
shown in the DKC Option window due
to a communication error between the
local and the remote storage systems.
ECheck the CHA status on the window. If the CHA
is blocked, replace the CHA, then retry the
operation.
The path could not be deleted due to a
communication error between the local
and the remote storage systems.
00870506505
WEnter the correct data.Parameter specified by Remote Copy
operation is invalid.
00870606505
WRefresh the window, and check the pair status. If
possible, retry the operation on the secondary
data volume.
The pair status of the secondary data
volume is incorrect.
00870806505
EReplace the channel adapter, then retry the
operation.
Remote Copy operation was rejected.00870906505
WRefresh the window, and check the pair status of
the pair. If the pair status can be manipulated,
retry the operation.
The pair status of the specified data
volume is incorrect.
00871006505
WCheck the port number, ID, and LUN of the
storage system.
The specified parameter is incorrect.00871106505
WIf you are performing a path operation, retry the
operation after the FREEZE status is released.
The operation was rejected due to a
'FREEZE' state.
00871206505
If you are performing a pair operation, check the
DKC status, wait until the SCP time elapses, then
retry the operation.
WExchange the port type after deleting the group
setting.
The port group already exists on the
specified port.
00871306505
Part code 06505 189