HP XP P9000 Remote Web Console User Guide

To send a test syslog:
1. Click Settings→Environmental Setting→Edit SIM Syslog Server Settings.
2. Make sure that the servers are set to Enable and that the settings in the window are correct.
3. Check Send a test message.
4. Enter a name in the Location Identification Name field to identify the storage system.
5. Click Finish
6. Specify a task name, and click Apply.
7. Confirm that the syslog servers received the following log: RefCode:7FFFFF, This is
a Test Report.
Sending a test syslog 63