HP XP P9000 Remote Web Console User Guide

The CipherSuites parameter can use any of the following values:
• SSL_RSA_WITH_RC4_128_SHA
• TLS_DHE_RSA_WITH_AES_128_CBC_SHA
• TLS_DHE_DSS_WITH_AES_128_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA
• SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA
• SSL_RSA_WITH_3DES_EDE_CBC_SHA
Setting up the CipherSuites parameter
Connect cipher suites with a comma (,) as a delimiter.
Example
CipherSuites=SSL_RSA_WITH_RC4_128_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,
TLS_DHE_DSS_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,
SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA,SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA,
SSL_RSA_WITH_3DES_EDE_CBC_SHA
VVolForSnapshot parameter
Use the VVolForSnapshot parameter to specify virtual volumes that the SMI-S provider can use
when you operate Fast Snap or Copy-on-Write Snapshot from CreateElementReplica of the
ReplicationService.
All virtual volumes are specified by default.
Setting up the VVolForSnapshot parameter
Set up the parameter by using <RangeOfVVol> and <SingleVVol> with a comma (,) as a
delimiter:
• <RangeOfVVol>: Specifies a range of virtual volumes
• <SingleVVol>: Specifies a single virtual volume
<RangeOfVVol> format
<S2HexLDKC>:<S2HexCU>:<S2HexLDEV>to<E2HexLDKC>:<E2HexCU>:<E2HexLDEV>
• <S2HexLDKC>: LDKC number (two-digit hexadecimal) of the first virtual volume in the specified
range
• <S2HexCU>: CU number (two-digit hexadecimal) of the first virtual volume in the specified
range
• <S2HexLDEV>: LDEV number (two-digit hexadecimal) of the first virtual volume in the specified
range
• <E2HexLDKC>: LDKC number (two-digit hexadecimal) of the last virtual volume in the specified
range
• <E2HexCU>: CU number (two-digit hexadecimal) of the last virtual volume in the specified
range
• <E2HexLDEV>: LDEV number (two-digit hexadecimal) of the last virtual volume in the specified
range
122 SMI-S provider configuration file