HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 34 Error codes (part code 03005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
to be maintained is in PSUS status or
being restored.
WCancel the pair definition, and then retry the
operation.
A Snapshot pair or Fast Snap pairs is
defined.
05862603005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
05870603005
WCheck the setting of the specified volume.The specified volume is used as a System
Disk volume.
06565003005
WCheck the setting of the specified volume.The specified volume is used as a Thin
Provisioning volume.
06565903005
WRelease the association between the pool volume
and the Thin Provisioning volume.
The pool volumes associated with the
Thin Provisioning volume is included in
the items to be maintained.
06567103005
WCheck the setting and status of the LDEV in the
specified parity group.
The LDEV to be operated is not included
in the specified parity group.
06567503005
WConfirm that it is associated with a pool in the
same CLPR.
The association cannot be made
because the pool is in a different CLPR.
06567603005
WCancel the format processing from the SVP, then
retry the formatting processing again.
A failure occurred while formatting.06568803005
WCancel the quick formatting processing from the
SVP, then execute the quick formatting processing
again.
A failure occurred while quick
formatting.
06568903005
WCheck the settings and retry the operation.The specified volumes contain volumes
that are being quick formatted.
06569003005
WCheck the status and wait until the status changes
to a status that maintenance is possible.
Preparing for quick format.06569103005
WSelect only the volumes that quick format can be
executed and execute quick format.
The specified volumes contain volumes
that quick format cannot be executed.
06569203005
WAdd the System Disk, or restore the blocked
System Disk then retry Quick Format.
Quick Format cannot be executed. There
is no System Disk area for Quick Format,
06569303005
If this problem persists even though the system
disk is normal and has enough capacity, please
contact HP Technical Support.
the capacity of the System Disk is
insufficient, or the System Disk is
blocked.
WChange the setting or wait until the quick format
processing for other parity groups is complete,
and then retry the operation.
The specified quick format cannot be
performed because either of the total
parity groups below exceeds the
06569403005
maximum that can be performed at a
time.
• Parity groups including LDEVs that
are in quick formatting.
• Parity groups including LDEVs that
are blocked during quick formatting.
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
06569503005
WSelect only the volumes that can be formatted and
format the volumes.
The specified volumes contain volumes
that cannot be formatted.
06571703005
WCheck if the configuration changing process by
the RAID Manager, the Auto LUN, or the Quick
The configuration changing processes
are conflicting at DKC.
06574003005
94 Messages (part code group 03nnn)