HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

4 Messages (part code group 02nnn)
This chapter lists the Remote Web Console error messages with part code 02000 to 02999 and
provides recommended action for each error.
Part code 02005
Table 32 Error codes (part code 02005)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSelect another volume.The specified volume cannot be set as
a command device or a component of
00100202005
a LUSE volume because the volume is
being used as a volume of continuous
Access Synchronous, Continuous Access
Journal, Business Copy, Auto LUN,
Snapshot, or Fast Snap.
WSelect another volume.The LUSE volume cannot be released
because the specified volume is being
00100602005
used as a volume of Continuous Access
Synchronous, Continuous Access
Journal, Business Copy, Auto LUN,
Snapshot, or Fast Snap.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The emulation type of the volumes is not
for open systems, or the volumes are not
mounted.
00100902005
WIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00101002005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
LU path is set to a volume which links as
an expanded LU.
00101202005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The emulation types of the volumes
combined into a LUSE volume are not
the same.
00101302005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
LU path is set to the releasing expanded
LU. (You need to release the expanded
LU and path at the same time.)
00101502005
WThe configuration information has been changed
already.
The specified volume does not exist.00102102005
Check the settings, and request the configuration
information setting again.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The number of volumes you intend to
combine into a LUSE volume exceeds
the maximum.
00102802005
WCheck the settings, then retry the operation.The following volumes cannot be
specified when you change the
expanded LU configurations:
00105002005
• Volumes that do not exist
• Volumes reserved by Auto LUN
• System Disk volume
WCorrect the specified contents, then retry the
operation.
The LUSE operation cannot be performed
because the volume is set as a command
device.
00112602005
Part code 02005 83