HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 29 Error codes (part code 01022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).The setting cannot be changed, because
the value of UUID is outside the range.
10508501022
WCheck the setting(s).The input value of the starting LUN ID is
outside the range.
10508601022
WCheck the setting(s).The LUN ID cannot be set, because the
value is outside the range.
10508701022
WCheck the check boxes for the items that you want
to change, then retry the operation.
The table column is not selected.10508801022
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10508901022
WCheck the setting(s).The specified LDEV and an LDEV with
LUN registered to the specified host
group have the same ID.
10509001022
WCheck the setting(s).The number of selected host groups that
can be set exceeds the maximum value.
10509101022
WCheck the setting(s).The attribute of the specified port is
neither Target nor RCU Target.
10509301022
WSpecify the HBA WWN with 16 digits in
hexadecimal.
The length of the HBA WWN is
incorrect.
10509401022
WCheck the setting(s).An LDEV for FICON(R) Data Migration
is selected.
10514501022
WInstall the program product. Or, log out, and then
log back in with permission to edit.
The operation cannot be performed
because the program product is not
10520401022
installed or you do not have permission
to access.
WCheck the setting(s).The number of LUNs that can be set to
the specified port has exceeded the
maximum.
10520701022
WCheck the setting(s).The specified host cannot be added
because the HBA WWN or the host
10520801022
name is used in the same port, or, it is
used in the item that has been moved in
the [Selected Host Groups] table.
WSet the item that is left blank, then retry the
operation.
The host mode is left blank.10520901022
WSet the item that is left blank, then retry the
operation.
There are blank items in the Host Mode
Options Table.
10521001022
WTo change the setting from Target/RCU Target to
Initiator/External, set only 00 to the host group
Other than the Host Mode 00 [Standard]
has been set to the Host Group #00 of
the specified port.
10525201022
of the target port, set the host mode to 00
[Standard], and set all of the host mode options
to Disable.
WTo change the setting from Target/RCU Target to
Initiator/External, set only 00 to the host group
[Enabled] has been set to the Host Mode
Option for the Host Group #00 of the
specified port.
10525301022
of the target port, set the host mode to 00
[Standard], and set all of the host mode options
to Disable.
76 Messages (part code group 01nnn)