HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 29 Error codes (part code 01022) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
same port, or it exists in the [Selected
Hosts] table.
WCheck if there is a target host to be set in the
[Selected Hosts] table. When there is not, add
The processing cannot be done because
of no data in the [Selected Hosts] table.
10502601022
host(s) and retry the operation. When there is,
close the window(s) and refresh it, then retry
again. If the same problem persists despite
retrying, please contact HP Technical Support.
WSelect one table row.[Detail] is clicked in the state that no row
is selected.
10502701022
WSelect one table row.[Detail] is clicked in the state that
multiple rows are selected.
10502801022
WCheck the setting(s).Host groups cannot be added in this
port, because the port is not Target or
RCU Target.
10502901022
WCheck the setting(s).No more host groups can be added,
because the number of registered host
10503001022
groups that can be added to the subject
port has reached the maximum.
WSelect one or more rows in the [Available Hosts]
table and the [Available Ports] table, then click
[Add].
The host group cannot be added
because no row is selected in any of the
[Available Hosts] table and the
[Available Ports] table.
10503101022
WCheck the setting(s).No more host groups can be added,
because the number of registered hosts
10503301022
that can be added to the subject port
has reached the maximum.
WEnter the host group name with up to 64
alphanumeric characters and symbols (\ /: , ; *
? "< > | are excluded).
The specified name of the host group is
incorrect.
10503701022
WSpecify another host group name.The default host group name cannot be
used for the host group setting.
10503801022
WSelect one table row.[Detail] is clicked without selecting any
row.
10504001022
WSelect one table row.[Detail] is clicked in the state of selecting
multiple table rows.
10504101022
WSelect one or more table rows.[Delete] is clicked without selecting any
row.
10504201022
WCheck if any of target host group to be set exists
in the [Selected Host Groups] table. When there
The processing cannot be done because
there is no data in the [Selected Host
Groups] table.
10504301022
is not, add host group(s) and retry the operation.
When there is, close the window(s) and refresh
it, then retry again. If the same problem persists
despite retrying, please contact HP Technical
Support.
WSelect one table row.[Detail] is clicked without selecting table
rows.
10504401022
WSelect one table row.[Detail] is clicked in the state of selecting
multiple table rows.
10504501022
74 Messages (part code group 01nnn)