HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

ManualsBrandsHP ManualsSoftwareHP StorageWorks XP RAID Manager

Table 28 Error codes (part code 01005) (continued)

Severity

Level

Recommended ActionError MessageError

Number

Part

Code

WRecovery processing may take about 1 minute.

Wait for a while.

The LDEV is being used by the host, or

an error occurred in the SVP procedure.

00201001005

WIf this problem persists, please contact HP

Technical Support.

An error occurred during SVP

processing.

00201301005

WIf the same error occurs despite retrying, please

contact HP Technical Support.

An error occurred while connecting to

the storage system.

00201501005

WIf the same error occurs despite retrying, please

contact HP Technical Support.

An error occurred while connecting to

the storage system.

00203201005

WUnmount the host and cancel reservation of the

device. If the host is an AIX host, unmount the

host, and execute the varyoffvg command.

Processing is disabled because the host

is mounted or the device is reserved.

00208201005

WCheck the DKC status and the current status of the

configuration setting. If necessary, re-execute the

setting operation.

Unexpected error occurred. Please

refresh the array configuration. The

storage system status is invalid.

00208301005

WCheck the DKC status and the current status of the

configuration setting. If necessary, re-execute the

setting operation.

Unexpected error occurred. Please

refresh the array configuration. The

storage system status is invalid.

00208401005

WCheck the settings, then retry the operation.The host specified by the WWN is

performing I/O operations.

00209701005

EWhen the same problem persists, please contact

HP Technical Support.

Error happened after some change

occurred. Please refresh the array

00209801005

configuration. The operation cannot be

performed, because the SVP microcode

version does not match the DKCMAIN

(storage system) microcode version.

WWait a while, then retry the operation. If the same

problem persists. Please contact HP Technical

Support.

The operation cannot be performed,

because an inoperative MP exists.

00209901005

WClick [Refresh All] on the [File] menu, then refresh

the configuration. If the same problem persists

An error occurred while connecting to

the storage system. The configuration

may be inconsistent.

00210001005

despite retrying, please contact HP Technical

Support.

WCorrect the settings, then retry.The volume cannot be configured as a

command device because the volume

does not have Read/Write attribute.

00250101005

WRelease the reserved attribute of the target volume

by using Data Retention.

No settings can be made because of a

volume reserved for RAID Manager.

00250401005