HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 28 Error codes (part code 01005) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WVerify the host mode option or the attribute of the
port.
The specified host mode option cannot
be set to the initiator port.
00136901005
WInstall the necessary PP license key.This functionality is not available. Open
System Array Management is required.
00160001005
WInstall the necessary PP license key.This functionality is not available. Open
System Array Management is required.
00160101005
WSelect another volume.The specified volume cannot be assigned
as an LUSE volume or a command
00190401005
device, and the path of the volume
cannot be set because it is being used
as a Pool volume.
WSelect another volume.The specified volume cannot be set as
a command device because the volume
00190601005
is being used as a V-VOL for Snapshot
or Fast Snap.
WCorrect the settings, then retry the operation.The specified volume is a remote
command device, and therefore the
00191201005
command device setting or the command
device security setting cannot be set or
released.
WDelete the external volume that is mapped to the
external port to be operated, then retry the
operation.
An external volume is mapped to the
external port to be operated.
00191801005
WCheck the setting.The path cannot be set to the specified
volume, because the volume is being
used as a quorum disk.
00192601005
WCheck the setting.The specified volume cannot be set as
a command device, because it is being
used as a quorum disk.
00192701005
WSet Host Mode Option 60 to OFF, and then
execute addition or deletion of paths for LUN0.
Addition or deletion of paths for LUN0
cannot be done because Host Mode
00192801005
Option 60 is set to ON. Also, setting
change of Host Mode Option 60 and
path change (addition or deletion) for
LUN0 cannot be done at the same time.
Execute the changing operations
separately.
WPlease contact HP Technical Support.Releasing the Host Mode Option 61 is
disabled.
00192901005
WSpecify a volume other than the external volume
mapped for the online data migration, and then
retry the operation.
The specified volume cannot be
operated, because the volume is used
as an external volume that is mapped
for online data migration.
00193001005
WFor the resources where the virtual mode of
resource group is on, perform the path definition
The path definition between the
resources included in different resource
00193201005
by specifying resources in the same resource
group.
groups cannot be done because the
virtual mode of at least one of the
resource groups is on.
WIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00200501005
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00200901005
Part code 01005 69