HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

3 Messages (part code group 01nnn)
This chapter lists the Remote Web Console error messages with part code 01000 to 01999 and
provides recommended action for each error.
Part code 01005
Table 28 Error codes (part code 01005)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSelect another volume.The specified volume cannot be set as
a command device or a component of
00100201005
a LUSE volume because the volume is
being used as a volume of Continuous
Access Synchronous, Continuous Access
Journal, Business Copy, Auto LUN,
Snapshot, or Fast Snap.
WThe configuration information has been already
changed.
You are trying to set multiple paths to
the same volume from one group.
00100301005
Check the settings, and request the setting of the
configuration information again.
WThe configuration information has been already
changed.
Multiple volumes are specified to a
single port, group or LUN combination.
00100401005
Check the settings, and request the setting of the
configuration information again.
WCheck the settings, then retry the operation.The following volumes cannot be
specified when you change the path
configurations:
00100501005
• Volumes that do not exist
• Volumes other than the top LUs in
expanded LUs
• Volumes reserved by Auto LUN
• System Disk volume
WCheck the setting.Failed to remove the path. The specified
path is the last path of the volumes used
00100701005
for Continuous Access Synchronous,
Continuous Access Journal Z, Business
Copy, Business Copy Z, Auto LUN,
Snapshot, or Fast Snap.
WThe configuration information has been changed
already. Check the settings, and request the
setting of the configuration information again.
The emulation type of the volumes is not
for open systems, or the volumes are not
mounted.
00100901005
WIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00101001005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The specified port does not exist. Or the
specified port type is not Fibre port.
00101801005
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid LUN.00102001005
Part code 01005 65