HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)
Part code 00710
Table 25 Error codes (part code 00710)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
iTo cancel the operation, click [OK]. Otherwise,
click [No].
Do you want to cancel?00910100710
WReply to the message.0 cannot be specified in all the fields or
the Class A field.
05501100710
WSpecify the data to be registered in the SVP, and
then retry the operation.
The displayed information has not been
changed. Try again.
05503000710
WSet a different value for the IP address and the
port number.
The value of the IP address and the port
number of the primary syslog server are
05559600710
the same as the ones of the secondary
syslog server.
EPlease log off from Remote Web Console. After
that, please log on to Remote Web Console again
An error occurred regarding screen
display. Please log off from Remote Web
05701100710
and check whether configuration changes have
been made correctly.
Console. After that, please log on to
Remote Web Console again and check
whether configuration changes have
been made correctly.
WClick [OK].The Syslog window might need to be set
again.
05931900710
Write down the IP address, the port
number, and the location identification
name which you have set in the Syslog
window.
WReply to the message.0 cannot be specified in all the fields.06568300710
Part code 00722
Table 26 Error codes (part code 00722)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCheck the setting(s).A radio button for Primary Server is not
selected.
10542300722
WCheck the setting(s).A radio button for Secondary Server is
not selected.
10542400722
WCheck the setting(s).A radio button for Primary Server IP
Address is not selected.
10542500722
WCheck the setting(s).A radio button for Secondary Server IP
Address is not selected.
10542600722
WCheck the setting(s).The setting cannot be changed, because
the value of Primary Server Port Number
is outside the range.
10542700722
WCheck the setting(s).The setting cannot be changed, because
the value of Secondary Server Port
Number is outside the range.
10542800722
WCheck the setting(s).The number of characters for the
Location Identification Name exceeds
the maximum (32 characters).
10542900722
Part code 00710 63