HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

1 Remote Web Console messages and error codes
This chapter describes the messages and error codes issued by the Remote Web Console software
for the P9500 storage system.
Remote Web Console messages
Figure 1-1 and Figure 1-2 show typical Remote Web Console message windows.
Figure 1 Sample message window1
Figure 2 Sample message window2
Message window format
Message level
Remote Web Console has the following four levels of messages:
Information
Warning
Fatal error
Unable to accept request from Remote Web Console. This message does not indicate an
error. One possible cause is that another process is in progress at the server.
Message text
The descriptive text that appears in the message window can include variables %s (character string)
and %d (numeral). The values of these variables are determined when processing is performed.
Messages with a part code 060xx (where xx is a two-digit number) are Continuous Access
Synchronous Z or Continuous Access Synchronous messages. This manual contains Continuous
Access Synchronous Z messages only. If you are a Continuous Access Synchronous user, note the
following.
• The term M-VOL in Continuous Access Synchronous Z messages is equivalent to P-VOL in
Continuous Access Synchronous messages.
• The term R-VOL in Continuous Access Synchronous Z messages is equivalent to S-VOL in
Continuous Access Synchronous messages.
6 Remote Web Console messages and error codes