HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 22 Error codes (part code 00605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
volume that includes Pool VOLs
registered in the pool that has the
association with a normal Thin
Provisioning volume.
WIf there is a volume whose cache mode cannot
be changed due to its bind mode setting, release
the bind mode setting first.
Set the same cache mode to all the
volumes that compose a Pool VOL.
06874200605
WWait for the migrating volume or the Quick
Restore to be completed, then retry the operation.
Volume migration or Quick Restore is in
progress.
06880000605
WSet the Audit Log buffer function to "Disable,"
then retry the operation.
The volume to be maintained includes
the system disk being used at Audit Log.
06880200605
WRelease the allocation of mirrors in the Journal for
the remote command device, then retry the
operation.
The specified volumes include remote
command devices being used with
mirrors in the Journal of the Continuous
06887100605
Access Journal or the Continuous Access
Journal Z.
WRelease the quorum disks, then retry the operation.Quorum disks are included in the items
to be maintained.
06888400605
WCheck the status of the mapping path and resolve
the root cause of blockade, then retry the
operation.
An external volume was not able to be
recovered.
06890100605
WCheck the status of the mapping path and resolve
the root cause of blockade if needed, then retry
the operation.
The external volume was able to be
restored, but some of mapping paths
were not able to be restored normally.
06890200605
WCheck the states of the external volume and the
mapping path, and do not retry the operation
until the states return to normal.
Failed to disconnect from the external
volume.
06890300605
If the states cannot be restored to normal, or if
the problem persists despite retrying, please
contact HP Technical Support.
WRecover the blocked MP Blade, then specify it.The specified MP Blade is blocked.07803100605
WCheck the specified MP Blade.The specified MP Blade is not mounted.07803200605
WDelete unnecessary volumes, then retry the
operation. If this problem persists, please contact
HP Technical Support.
A sufficient Cache Control Device cannot
be allocated to the target volume.
07804700605
WTry again. If this problem persists, contact HP
Technical Support.
An error occurred while accessing the
user information.
07804800605
WLog out, and then log back in with access to the
resource group containing the port that is
connected to the specified external volume.
The port that is connected to the
specified external volume belongs to a
resource group that you do not have
permission to access.
07804900605
WLog out, and then log back in with access to the
resource group containing the port that is
connected to the specified external path.
The port that is connected to the
specified external path belongs to a
resource group that you do not have
permission to access.
07805000605
WLog out, and then log back in with access to the
resource group containing the port that is
connected to the specified external path group.
The port that is connected to the
specified external path group belongs
to a resource group that you do not have
permission to access.
07805100605
Part code 00605 57