HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 22 Error codes (part code 00605) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
this setting, but an error in the others
settings.
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00800000605
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00800100605
WCheck whether the DKCMAIN microcode version
and the SVP microcode version are mismatched.
This function is not supported.00810200605
WWait for a while, then retry the operation.Another maintenance processing is in
progress.
00812200605
WCheck the licensed capacity, then specify it within
the licensed capacity or add the licensed
capacity.
The command was rejected, because
the licensed capacity has exceeded the
maximum.
00813600605
WRelease the configuration definition of Compatible
FlashCopy or Compatible FlashCopy SE, and then
retry the operation.
The configuration of Compatible
FlashCopy or Compatible FlashCopy SE
is defined.
00814000605
EIf this problem persists, please contact HP
Technical Support.
An error occurred on the DKC side.00895800605
EIf this problem persists, please contact HP
Technical Support.
An error occurred on the DKC side.00896600605
WRestore more than one path to the external
volume, then perform the operation of the external
volume.
The operation of the external volume has
been failed because all the paths to the
external volume are blocked.
00897900605
WCheck the emulation type. If you want to change
the cache segment size to set the specified
An emulation type that cannot be added
is specified.
05651300605
emulation type, please contact HP Technical
Support.
WExecute the Disconnect External Storage Systems
or the Disconnect External Volumes, then retry the
operation.
The Disconnect External Storage Systems
or the Disconnect External Volumes is
not executed for the target volume.
05651500605
WRelease the configuration definition of Continuous
Access Synchronous or Continuous Access
Synchronous Z, then retry the operation.
The configuration of Continuous Access
Synchronous or Continuous Access
Synchronous Z is defined.
05651600605
WRelease the pair definition and then retry the
operation.
A pair of Business Copy, Business Copy
Z, Fast Snap, or Snapshot is defined.
05651700605
WRelease the reserved volume setting for Business
Copy or Business Copy Z, then retry the
operation.
The reserved volume setting for Business
Copy or Business Copy Z is defined.
05651900605
WRelease the reserved volume setting for Auto LUN,
then retry the operation.
The reserved volume setting for Auto
LUN is defined.
05652000605
WRestore the Blocked path or add an additional
path, then retry the operation.
The operation cannot be performed due
to one of the following reasons:
05825800605
• All the paths to the external volume
are blocked.
• No paths will be available if this
operation is performed.
WMake the setting of the paths to keep at least one
path available, then retry the operation.
No paths will be available, if you
change the setting of paths.
05826300605
52 Messages (part code group 00nnn)