HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 99 Error codes (part code 20123) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ECheck the internet protocol (IP) address. If the IP
address is correct, terminate the browser (also
A network error occurred. It is not
possible to connect with the SVP due to
one of the following reasons.
10701620123
terminate the storage list browser), then log it in
again.
• The SVP was not ready.
• An error occurred in the SVP.
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
10701720123
ELog in again.A network error occurred. It is not
possible to connect with the SVP because
10701820123
a timeout error occurred while
communicating with the SVP.
EIf this problem persists, please contact HP
Technical Support.
Failed to restore the user account list file.10701920123
WInstall a supported version of JRE, then retry the
operation.
An unsupported version of JRE is used.10702020123
ERefresh the window, then retry the operation. If
the same problem persists despite retrying, please
contact HP Technical Support.
An internal logic error occurred.10702120123
ERefresh the window, then retry the operation. If
the same problem persists despite retrying, please
contact HP Technical Support.
An internal logic error occurred.10702220123
EClick [Refresh All] on the [File] menu, then retry
the operation. If the same problem persists despite
retrying, please contact HP Technical Support.
An internal logic error occurred.10702320123
EIf the same problem persists despite retrying,
please contact HP Technical Support.
The content of a task to be registered
conflicts with that of another that has
10702420123
already been registered. Retry the
operation.
WWait for a while, then retry the operation.The operation failed, because the
configuration information was being
changed.
10702520123
WWait, then retry the refreshing operation.The operation failed because the storage
system performed refreshing internally.
10702620123
WWait, then retry the refreshing operation.The refreshing operation was not
completed because the configuration
was changing.
10702720123
EYou cannot connect to the SVP because of factors,
such as a network error or SVP error. Check the
A network error occurred. The causes
might be one of the following.
10702820123
IP address. If the IP address is correct, close the
• The SVP was not ready.
browser (also close the browser of the storage
• An error occurred in the SVP.
list), and log in again after waiting a while. If the
problem persists, please contact HP Technical
• A timeout error occurred while
communicating with the SVP.
Support. The version of Remote Web Console
may not match the version of destination SVP.
Clear the cache of JRE and the browser. Restart
the browser, and then retry the processing. The
Remote Web Console is downloaded via the
network and then executed. If you use a proxy
server, the old version of the program may remain
in the cache of the proxy, and may be
downloaded and executed. If this problem
persists, contact your network administrator. If
Part code 20123 345