HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 98 Error codes (part code 20122) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSet a password within the range shown on the
password window.
The entered password is outside the
setting range.
10547720122
WSet a password with the password policy shown
on the password window.
The entered password does not meet the
password policy.
10547820122
WRetry the operation.Failed to write in the password policy
file.
10547920122
EIf the problem persists despite retrying, please
contact HP Technical Support.
An unexpected error occurred.10600420122
ECheck the details of the error from the following
error code list.
An error occurred.10603920122
ECheck the details of the error from the following
error code list.
An error occurred.10605620122
ECheck the details of the error from the following
error code list.
An error occurred.10605720122
ECheck the details of the error from the following
error code list.
An error occurred.10605820122
ECheck the details of the error from the following
error code list.
An error occurred.10605920122
ECheck the details of the error from the following
error code list.
An error occurred.10606020122
ECheck the details of the error from the following
error code list.
An error occurred.10606120122
WCollapse other tree nodes, then retry the
operation.
The tree node cannot be expanded any
further.
10607220122
WTo continue, click [OK]. Otherwise, click [Cancel].Only a host registered in a group is
allowed to access a LUN that is defined
10607320122
in the target group. A host that is not
registered in any group is not allowed
to access any LUN. Do you want to
continue this operation?
WTo continue, click [OK]. Otherwise, click [Cancel].All the hosts connected to the target ports
are only allowed to access a LUN that
10607420122
is defined in the group #00. This will
lead the possibility that LUNs, which are
defined in the group other than #00
being used at present, cannot be
recognized, then the file system might
be destroyed. Do you want to continue
this operation?
WTurn the security switch on.The configuration does not become
effective until the security switch is turned
on.
10607520122
WClick [OK] and verify the current configuration
displayed in the list.
The specified item could not be
displayed because the configuration had
been changed.
10607920122
WIf you do not want to continue, click [Cancel] and
go back to Delete LUN Paths window, then click
[Finish] to complete.
Are you sure to execute "Shred LDEVs"?
This task execution deletes all of the
target LDEV data and the data cannot
be recovered.
10608920122
342 Messages (part code group 20nnn)