HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 94 Error codes (part code 10122) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WVerify the configuration of the encryption keys.There are no encryption keys already
created.
10547110122
WSet the total of input values under the maximum.The total of input values exceeds the
maximum.
10548010122
IVerify the Total column in the password policy
table.
The value in the Total column was
updated because the total of the
10548110122
respective minimum number of
characters below has exceeded the
value in the
Total column.
• Numeric characters (0-9)
• Uppercase characters (AZ)
• Lowercase characters (a-z)
• Symbols
WRead the notice for the key generation
protection, and check the "I agree" check box
if you agree.
You have not agreed to the notice for
the key generation protection.
10548210122
WVerify the backup information on the key
management server.
There is no encryption key backup
information in the key management
server.
10549110122
WVerify the backup information on the key
management server.
There is no encryption key backup
information in the key management
server.
1054921022
WCheck the setting(s).The re-entered password does not
match the password which is entered
previously.
10608110122
WWait for a while, then retry the operation. If the
problem still persists, close the window, then
check the task status.
Operation cannot be done because a
task is in progress now.
10608210122
EIf the problem persists despite retrying, please
contact HP Technical Support.
A timeout error occurred.10608310122
WCheck the specified file.The size of the specified file is too
large.
10608410122
WCheck the configuration of the encryption keys.The encryption key that has been
generated does not exist.
10608510122
WBlock all LDEVs in the parity group where the
encryption key is set, then retry the operation.
The LDEVs in a parity group where the
encryption key is set are not all
blocked.
10608810122
EIf the problem persists despite retrying, please
contact HP Technical Support.
An internal logic error occurred.10700110122
EIf the problem persists despite retrying, please
contact HP Technical Support.
An internal logic error occurred.10700210122
ERefresh the window, and then retry the
operation. If this problem persists, contact HP
Technical Support.
The processing cannot continue due to
an internal logic contradiction.
10700310122
WTo continue, click [OK]. Otherwise, click
[Cancel].
Creating encryption keys should be
limited to 30 in the case of necessity
for updating those keys.
10902710122
Part code 10122 331