HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 90 Error codes (part code 09605) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WCheck the logical volume configuration, then retry
the operation.
This logical volume is already used as
an S-VOL for Remote Copy or Business
Copy.
00813509605
WThe currently licensed capacity is insufficient. To
increase the licensed capacity, buy a new license
key.
The command was rejected, because
the licensed capacity was exceeded.
00813609605
ETo release the Reserved setting, please contact
HP Technical Support.
The Reserved setting of the specified
volume cannot be released. If you want
00813809605
to release the Reserved setting, please
contact HP Technical Support.
WCheck the volume, then retry the operation.The specified volume is a P-VOL for
Business Copy.
00813909605
WCheck the volume, then retry the operation.This logical volume cannot be selected
because it is used as a reserve volume
for Auto LUN.
00814109605
WCheck the logical volume, then retry the operation.You cannot select this logical volume
because it is used as a Continuous
Access Journal volume.
00814209605
WCheck the logical volume, then retry the operation.You tried to set a retention term to a
logical volume whose access attribute is
not Read Only or Protect.
00815009605
WTo shorten it, please contact HP Technical
Support.
The retention term of the logical volume
cannot be shortened.
00815109605
WSpecify an open-systems volume.You cannot set a retention term to any
mainframe volumes.
00815209605
WCorrect the retention term, then retry the
operation.
The specified retention term exceeds the
maximum.
00815309605
WCheck the retention term of the logical volume,
then retry the operation.
The retention term of the logical volume
has been changed by RAID Manager.
00815409605
WTo change the access attribute of the logical
volume to Read/Write, please contact HP
Technical Support.
You cannot change the access attribute
because a retention term is set to the
specified logical volume.
00815509605
WSet the expiration lock to Disable, then change
the access attribute.
You cannot change the access attribute
because the expiration lock is set to
Enable.
00815609605
WRetry the operation after the process is completed.The specified operation cannot be
executed because the LDEV shredding
or the LDEV format is being executed.
05840409605
WSelect another volume.The attribute of the pool volume cannot
be changed.
05841209605
WSelect a different volume. WThe attribute of the virtual volume for Fast
Snap or Snapshot cannot be changed.
05841309605
WSelect a different volume. WThe attribute of the P-VOL or the S-VOL
for Fast Snap or Snapshot cannot be
changed.
05841409605
WRelease or suspend the Continuous Access Journal
volume.
The access attribute cannot be changed,
because the status of the specified
05841809605
Continuous Access Journal volume is in
"PAIR" or in "COPY."
326 Messages (part code group 09nnn)