HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 88 Error codes (part code 09205) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WEnter a correct attribute in the [Attribute] of the
spreadsheet (enter Read/Write, Read Only, or
Protect).
The access attribute set in the [Attribute]
of the spreadsheet is incorrect (an
attribute other than Read/Write, Read
Only, or Protect is entered).
06601309205
WCheck the logical volume configuration, then retry
the operation.
This logical volume cannot be selected
because it is used as a volume for
System Disk.
06800209205
WLog out, and then log back in with access to the
resource group containing the specified LDEV.
The specified LDEV belongs to a
resource group that you do not have
permission to access.
07501509205
WSpecify another logical volume, or release the
setting of the pool volume, then retry the
operation.
This logical volume cannot be selected
because its emulation type is 3390-V or
it is used as a pool volume.
07806809205
WCheck the logical volume, and then retry the
operation.
This logical volume cannot be selected
because the volume is used as a volume
for FICON(R) Data Migration.
07828009205
Part code 09210
Table 89 Error codes (part code 09210)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
00706009210
WIf this problem persists, please contact HP
Technical Support.
There is an invalid value in the Volume
Retention information.
00744209210
WIf this problem persists, please contact HP
Technical Support.
The VTOC information contains one or
more invalid values.
00744309210
WMount volumes, then retry the operation.There is no valid volume.00811209210
WTo continue processing, click [OK]. To stop
processing, click [Cancel].
The value that is under setup is not
reflected yet. Do you want to continue
the operation?
00910709210
Part code 09605
Table 90 Error codes (part code 09605)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
ETry again. If this problem persists, contact HP
Technical Support.
An error occurred during SVP
processing.
00501309605
WIssue a command again.No commands are issued.00503009605
WDecrease the number of commands.The number of issued commands
exceeds the maximum.
00504109605
WInstall Program Product.The program product is not installed.00551109605
WReview LUs, and retry the operation.The number of requests for combining
LUs does not match the number of the
LUs.
00580909605
324 Messages (part code group 09nnn)