HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 77 Error codes (part code 08510) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.Some of the selected ports cannot
migrate to the other SLPR. Please change
the settings.
05523808510
EPlease contact HP Technical Support.Some of the selected parity groups
cannot migrate to the other SLPR. Please
change the settings.
05524008510
WSelect another parity group, then retry the
operation.
The concatenated parity group cannot
be set across multiple CLPRs. Please
05526108510
select another parity group, and then
retry the operation.
WApply the tentative settings with no parity groups
to the CLPR that you have created, then migrate
the parity group.
The Parity Group cannot be migrated to
the CLPR that you newly created. Please
apply the tentative settings with no parity
05526208510
groups to the CLPR that you have
created, and then migrate the parity
group.
WMigrate all parity groups in the CLPR to another
CLPR, then delete the CLPR.
The CLPR that has some parity groups
cannot be deleted. Migrate all parity
05563608510
groups in the CLPR to another CLPR, and
then delete the CLPR.
ETo initialize the partition configuration, click [Yes].
To stop the operation, click [No].
The partition configuration may contain
some inconsistent information.
05700108510
WCheck the settings.The maximum number of SSIDs that can
be registered will be registered except
the duplicate SSIDs.
05906708510
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
05910108510
associated with the CU are to be added
to this SLPR.
iCheck the settings.The SSID(s) are associated with the
specified CU. All SSIDs that are
05910208510
associated with the CU are to be deleted
from this SLPR.
WDelete unnecessary SSIDs from this SLPR, then
retry the operation.
SSIDs that are associated with the
selected CU cannot be added to this
05911008510
SLPR because too many SSIDs have been
set in the SLPR.
ECheck the settings.Ports in high-speed mode are set across
multiple SLPRs. If you perform this
05911408510
operation, the user having access to
these SLPRs become unable to use. Do
you want to continue this operation?
iClick [OK].Notice from Partition Definition:07900008510
Installation of Open System Array
Management is required to create more
than four CLPRs.
iClick [OK].Notice from Partition Definition:07900108510
Additional cache memory is required for
CLPR0 to create a CLPR.
Part code 08510 311