HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)
Table 75 Error codes (part code 08505) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
the information of the SLPR that the user
owns. SLPR No:%s
WCorrect the licensed capacity on the License Key
Partition Definition panel.
The licensed capacity was exceeded
because the configuration is changed.
05653608505
EIf this problem persists, please contact HP
Technical Support.
An unknown error was detected.05700208505
WCheck the status of the storage system. If this
problem persists, please contact HP Technical
Support.
Some shared memory of the storage
system may be blocked, or the storage
system is being maintained.
05831008505
WCheck the status of the storage system. If this
problem persists, please contact HP Technical
Support.
Some cache memory of the storage
system may be blocked, or the storage
system is being maintained.
05831108505
WWait until the write pending rate falls, then retry
the operation.
The configuration cannot be changed
because the write pending rate of the
05831208505
intended CLPR is too high. Please wait
until the write pending rate falls, and
then retry the operation.
WCheck the Cache Residency size and the number
of Cache Residency areas.
The configuration cannot be changed
because the available Cache Residency
05831308505
size or the number of Cache Residency
areas in the intended CLPR is insufficient.
WRetry the operation after the maintenance job is
completed.
A maintenance job is running in the
storage system (Correction Copy, Drive
05831508505
If LDEV formatting, LDEV shredding or Extent
shredding is not operating, please contact HP
Technical Support.
Copy, LDEV formatting, LDEV shredding,
and Extent shredding). Retry the
operation after the maintenance job is
completed.
WWait a while, then retry the operation.Parity groups in CLPR are being
migrated in the storage system. Please
05831608505
wait for a while, and then retry the
operation.
WWait a while, then retry the operation.CLPR capacity is being changed in the
storage system. Please wait for a while,
and then retry the operation.
05831708505
EIf this problem persists, please contact HP
Technical Support.
An error occurred on the DKC while
obtaining information about the progress
of CLPR processing.
05831808505
WSpecify the parity groups that do not contain any
journal volumes of Continuous Access Journal and
The CLPR which the parity groups belong
to cannot be changed, because the
05833908505
Continuous Access Journal Z, or specify the parityspecified parity groups do not include
groups that contain all the journal volumes in the
journal.
all the journal volumes in a journal of
Continuous Access Journal and
Continuous Access Journal Z. Make sure
to specify the parity groups that contain
all the journal volumes in the journal.
WCheck if the configuration changing process by
the RAID Manager, the Auto LUN, or the Quick
The configuration changing processes
are conflicting at DKC.
06574008505
Restore is not in operation, and then retry the
operation.
WDecrease the cache capacity of CLPR after
releasing the Cache Residency setting.
The cache capacity of CLPR cannot be
decreased because Cache Residency is
set to the CLPR.
07501308505
Part code 08505 309