HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 69 Error codes (part code 08105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid host mode.00102208105
WCorrect the specified content, and issue the
request again. (Currently, Bad Value Send report
in Set Response.)
The specified fiber address is wrong.00102308105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
Invalid Fibre topology information.00102408105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again
The specified LU path does not exist.00102508105
WCheck the specified contents, then retry the
operation.
LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
00105908105
WYou are trying to perform LUN Security operation
for a port where LUN Security function is invalid.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
00106108105
The error does not occur normally because it
cannot be modified in the window. In the unlikely
event that this error occurs, please contact HP
Technical Support.
WCheck the specified contents, then retry the
operation.
The specified WWN is already in use.00106308105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
You are trying to register the same
WWN that is already registered.
00106408105
WCorrect the specified contents, and request the
setting of the configuration information again.
The specified host name or the host
group name is already registered. (The
00106508105
host name and the host group name
cannot be the same.)
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
WWN number, which is not registered,
is specified. (When deleting, or
changing.)
00106608105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
You are trying to register the same host
group as the existing one.
00106708105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The specified host group has not been
registered.
00106808105
WCheck the setting, then retry the operation.The following volumes cannot be
specified when you change the
command device configurations:
00110808105
• Volumes reserved by Auto LUN
• Volumes other than the open-system
volumes (including unmounted
volumes)
• System Disk volume
WRemove the prohibited characters from the
nickname.
You cannot use following characters for
the name:
00111008105
" \ / : , ; * ? < > |
296 Messages (part code group 08nnn)