HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 68 Error codes (part code 08005) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WInstall the required program product.This functionality is not available.06876208005
Encryption License Key is required.
WUse the correct encryption key.The serial number of the encryption key
does not match.
06876608005
Part code 08105
Table 69 Error codes (part code 08105)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WSelect another volume.The specified volume cannot be set as
a command device or a component of
00100208105
a LUSE volume because the volume is
being used as a volume of Continuous
Access Synchronous, Continuous Access
Journal, Business Copy, Auto LUN,
Snapshot, or Fast Snap.
WThe configuration information has been already
changed.
You are trying to set multiple paths to
the same volume from one group.
00100308105
Check the settings, and request the setting of the
configuration information again.
WThe configuration information has been already
changed.
Multiple volumes are specified to a
single port, group or LUN combination.
00100408105
Check the settings, and request the setting of the
configuration information again.
WCheck the settings, then retry the operation.The following volumes cannot be
specified when you change the path
configurations:
00100508105
• Volumes that do not exist
• Volumes other than the top LUs in
expanded LUs
• Volumes reserved by Auto LUN
• System Disk volume
WCheck the setting.Failed to remove the path. The specified
path is the last path of the volumes used
00100708105
for Continuous Access Synchronous,
Continuous Access Journal, Business
Copy, Auto LUN, Snapshot, or Fast
Snap.
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The emulation type of the volumes is not
for open systems, or the volumes are not
mounted.
00100908105
WIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00101008105
WThe configuration information has been changed
already. Check the settings, and request the
configuration information setting again.
The specified port does not exist. Or the
specified port type is not Fibre port.
00101808105
Part code 08105 295