HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 67 Error codes (part code 07110) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EPlease contact HP Technical Support.An internal logic contradiction occurred.00853407110
iSpecify the volume of supported emulation type.The emulation type is invalid.00856807110
WCheck the error code in Preview list.Some settings could not be applied
normally. Refer to the error code.
00865807110
WCheck the contents, and retry.There is no volume.00865907110
iThe operation was ended normally. Execute the
next operation.
The requested operation has been
completed.
00900207110
iAn error occurred during the indicated operation.
See the error code for each operation in Preview
list.
An error occurred. Check the error code.00900507110
iTo cancel, click [OK].Do you want to cancel?00910107110
iClick [OK] to execute the operation.Do you want to apply?00910207110
iTo continue processing, click [OK]. Otherwise,
click [Cancel].
The option has been changed. If you
continue processing before applying the
00910807110
change, the option will be reset to the
current setting. Do you want to continue
processing?
WTo continue processing, click [OK]. Otherwise,
click [Cancel].
Do you want to execute the Initialize
operation?
00911007110
iTo continue processing, click [OK]. To stop
processing, click [Cancel].
Do you want to enable the setting to
expand the number of relationships?
00937707110
iTo continue processing, click [OK]. To stop
processing, click [Cancel].
Do you want to disable the setting to
expand the number of relationships?
00937807110
WCheck the selected T-VOL.The volume in the pair status is included
in the selected T-VOL.
05500307110
WCorrect the number of selected S-VOLs and
T-VOLs.
The number of selected S-VOLs is not
corresponding to the number of selected
T-VOLs.
05500407110
WCheck the values, then enter correct values.The entered values are incorrect. Check
the values and then enter correct values.
05559707110
WRefresh the window, then retry the operation.The operation cannot be executed
because the obtained information
contains an invalid value.
05861907110
iTo continue the operation, click [OK].The CLPR used for the S-VOL differs from
the CLPR used for the T-VOL. Do you
want to continue this operation?
05900007110
ETo continue the operation, click [OK].The S-VOL and the T-VOL belong to
different SLPRs. Do you want to continue
this operation?
05904807110
EPlease contact HP Technical Support.The S-VOL and the T-VOL belong to
different SLPRs. If you perform this
05906907110
operation, the storage partition
administrator will become unable to
operate.
Do you want to continue this operation?
WTo continue processing, click [OK]. Otherwise,
click [Cancel].
The data has been changed. The settings
will be discarded if you continue the
06566207110
Part code 07110 291