HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 66 Error codes (part code 07105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
Access Manager pair is created by using
Thin Provisioning volumes.
WUse a different consistency group, or release the
pair of Fast Snap or Snapshot, which is using the
specified consistency group.
The command was rejected because the
specified consistency group is used by
Fast Snap or Snapshot.
06883207105
WUse another CTG, or release the pair of Business
Copy Z where the specified CTG is in use.
The command has been rejected,
because the specified CTG is used by
Business Copy Z.
06883307105
WUse another CTG, or release the pair of Business
Copy where the specified CTG is in use.
The command has been rejected,
because the specified CTG is used by
Business Copy.
06883407105
WSpecify the volume not used as S-VOL of SI
Operation for Mainframe Fibre Data Migration,
The SI Operation for FICON(R) Data
Migration failed, because more than one
06885407105
or retry the operation after deleting the current
pair.
T-VOL was assigned for the specified
S-VOL.
WThe operation cannot be performed in the current
pair status of the Continuous Access Journal Z.
The specified S-VOL (Primary Volume) is
a volume of using two mirrors, which is
06892207105
See the section "Interoperability with otherincluded in the 3DC cascade or the 3DC
products and functions" in the Business Copy Zmulti-target configuration. The operation
User Guide for the relation between the pair statusfor this specified volume failed due to
the following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
of the Continuous Access Journal Z and the
Business Copy Z operations.
WThe operation cannot be performed in the current
pair status of the Continuous Access Journal Z.
The specified T-VOL (Secondary Volume)
is a volume of using two mirrors, which
06892307105
See the section "Interoperability with otheris included in the 3DC cascade or the
products and functions" in the Business Copy Z3DC multi-target configuration. The
User Guide for the relation between the pair statusoperation for this specified volume failed
due to the following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
of the Continuous Access Journal Z and the
Business Copy Z operations.
WSpecify a different volume.The specified volume is a volume of
using two mirrors, which is included in
06892407105
the 3DC cascade or the 3DC multi-target
configuration. The operation for this
specified volume failed due to the
following reason.
• The specified volume is used by a
data volume of the Continuous
Access Journal Z.
WAssociate the specified Thin Provisioning Z volume
with a pool, and then retry the operation.
The command was rejected, because
the Thin Provisioning Z volume specified
07500207105
as S-VOL (Primary Volume) was not
associated with a pool.
WAssociate the specified Thin Provisioning Z volume
with a pool, and then retry the operation.
The command was rejected, because
the Thin Provisioning Z volume specified
07500307105
as T-VOL (Secondary Volume) was not
associated with a pool.
WAssociate the specified Thin Provisioning Z volume
with a pool, and then retry the operation.
The command was rejected, because
the Thin Provisioning Z volume specified
07500407105
288 Messages (part code group 07nnn)