HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 66 Error codes (part code 07105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
WThe SI Operation for FICON(R) Data Migration
cannot be executed in the current pair status.
The SI Operation for FICON(R) Data
Migration failed, because the pair status
06876907105
Change the status of the pair to Suspend(Mig.),
then retry the operation.
of the specified pair was not
Suspend(Mig.).
WRelease the Cache Residency Z setting in the
T-VOL.
The SI Operation for FICON(R) Data
Migration failed because the Cache
06877007105
Residency Z setting was set in the T-VOL
of the specified pair.
WRelease the Volume Retention setting in the T-VOL
or specify another volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed, because the Volume
Retention setting was set in the T-VOL of
the specified pair.
06877107105
WDelete the Continuous Access Journal Z pair or
specify another volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed because the T-VOL of
the specified pair was used by
Continuous Access Journal Z.
06877207105
WDelete the Continuous Access Synchronous Z pair
or specify another volume, and then retry the
operation.
The SI Operation for FICON(R) Data
Migration failed, because the T-VOL of
the specified pair was used by
Continuous Access Synchronous Z.
06877307105
WExternal Storage volume cannot be used as a
T-VOL. Specify another volume.
The SI Operation for FICON(R) Data
Migration failed, because the T-VOL of
06877407105
the specified pair was used by External
Storage.
WThe specified operation cannot be executed in
the current pair configuration. Specify volumes
The command has been rejected,
because the S-VOL of the specified pair
06877507105
other than FICON(R) Data Migration Source
Volume for S-VOL, and then retry the operation.
is a FICON(R) Data Migration Source
Volume.
WThe specified operation cannot be executed in
the current pair configuration. Specify volumes
The command has been rejected,
because the T-VOL of the specified pair
06877607105
other than FICON(R) Data Migration source
volume for T-VOL, and then retry the operation.
is a FICON(R) Data Migration Source
Volume.
WThe specified operation cannot be executed to
FICON(R) Data Migration source volume. Specify
The command has been rejected,
because the specified volume is a
06877707105
a volume other than FICON(R) Data Migration
source volume, and then retry the operation.
FICON(R) Data Migration Source
Volume.
WThe operation cannot be done because the
capacity of target volume changes. Verify the
The command was rejected because the
specified S-VOL (Primary Volume) was
06880807105
capacity of the volume, and then retry the
operation.
a Thin Provisioning Z volume whose
capacity was being added.
WThe operation cannot be done because the
capacity of target volume changes. Verify the
The command was rejected because the
specified T-VOL (Secondary Volume) was
06880907105
capacity of the volume, and then retry the
operation.
a Thin Provisioning Z volume whose
capacity was being added.
WVerify the capacity of the volume, and then retry
the operation.
The command was rejected because the
specified reserved volume was a Thin
06881007105
Provisioning Z volume whose capacity
was being added.
WDelete the Continuous Access Synchronous pair,
Continuous Access Journal pair, or External
The initialize function cannot be
executed, because a Continuous Access
06881407105
Storage Access Manager pair that is using Thin
Provisioning volumes, then retry the operation.
Synchronous pair, a Continuous Access
Journal pair, or a External Storage
Part code 07105 287