HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 66 Error codes (part code 07105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
Access Journal Z pair and the Business Copy Z
operations.
WThe P-VOL of Continuous Access Journal Z pair
for Delta resync cannot be specified as S-VOL.
Specify another volume.
The operation failed because the
specified T-VOL (Secondary Volume) was
used by Delta resync of Continuous
Access Journal Z.
05863107105
WThe P-VOL of Continuous Access Journal Z pair
for Delta resync cannot be specified as a reserved
volume.
The reserve volume setting failed
because the specified volume was used
by Delta resync of Continuous Access
Journal Z.
05863207105
Specify another volume.
WRefresh the Business Copy Z window, and then
verify the MU number that can be used.
The operation failed because the
specified MU number was already used.
Specify other MU numbers.
05871107105
WRetry the operation after the Quick Format has
completed.
The command has been rejected,
because Quick Format is performed on
the specified S-VOL (Primary Volume).
06874307105
WRetry the operation after the Quick Format has
completed.
The command has been rejected,
because Quick Format is performed on
the specified T-VOL (Secondary Volume).
06874407105
WFICON(R) Data Migration source volume cannot
be used as a T-VOL. Use other volumes.
FICON(R) Data Migration Source
Volume is specified as a T-VOL.
06874507105
FICON(R) Data Migration Source
Volume cannot be used as a T-VOL.
WThe specified pair cannot be operated because
the pair uses FICON(R) Data Migration source
volume.
The command has been rejected
because the pair uses FICON(R) Data
Migration Source Volume.
06874607105
WCancel the setting where the T-VOL is used by the
other program products, then retry the operation.
The command has been rejected
because the FICON(R) Data Migration
06874707105
source volume is used in the specified
pair, and T-VOL is used by one of the
following program products.
• Continuous Access Synchronous Z
• Continuous Access Journal Z
• Compatible FlashCopy
• Mainframe Array Management
WYou cannot execute the Quick Restore command
with the current pair configuration.
The Quick Restore command was
rejected because the specified pair was
06875007105
composed of a Thin Provisioning Z
volume and a volume other than the Thin
Provisioning Z volume.
WThe SI Operation for FICON(R) Data Migration
cannot be executed in the current pair
The SI Operation for FICON(R) Data
Migration failed, because the specified
06876707105
configuration. Specify FICON(R) Data Migrationpair consisted of an S-VOL other than a
source volume for S-VOL, and specify volumesFICON(R) Data Migration Source
other than FICON(R) Data Migration source
volume for T-VOL.
Volume, or a T-VOL that is a FICON(R)
Data Migration Source Volume.
WThe SI Operation for FICON(R) Data Migration
cannot be executed in the current pair status.
The SI Operation for FICON(R) Data
Migration failed, because the pair status
06876807105
Change the status of the pair to SIMPLEX or
DUPLEX, then retry the operation.
of the specified pair was not SIMPLEX
or DUPLEX.
286 Messages (part code group 07nnn)