HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 66 Error codes (part code 07105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
contain a pair in other than
Split/SUSPOP or Suspend/SUSPER
status.
WYou cannot execute the specified operation.
Release the Remote Copy pair for the operation.
The Reverse Copy command has been
rejected, because the S-VOL (Primary
00864507105
Volume) is shared as the M-VOL of a
Remote Copy pair.
WDelete the Remote Copy pair.The Reverse Copy request was rejected,
because the S-VOL (Primary Volume) was
00864607105
shared with a Remote Copy pair in the
non-suspend status.
WDelete the Remote Copy pair.The Reverse Copy command has been
rejected, because the T-VOL (Secondary
00864707105
Volume) is shared with an M-VOL of a
Remote Copy pair.
WCheck the specified volume number.The boot device and the S-VOL (Primary
Volume) do not match in the Add Pair
(Create Pairs) command.
00864807105
WCheck the specified volume number.Because the boot device is the T-VOL
(Secondary Volume) in the Delete Pairs
command, the flag does not match.
00864907105
WCheck the specified volume number.The boot device and the S-VOL (Primary
Volume) do not match in the Add Pair
00865007105
(Create Pairs), Resync Pairs, or Delete
Pairs command.
WCheck the contents, and retry.The SSID is invalid.00865107105
WCheck the target volume number.The boot device is not a S-VOL (Primary
Volume) nor T-VOL (Secondary Volume).
00865207105
WCheck the target volume number.Because the boot device is the S-VOL
(Primary Volume) in the Delete Pairs
command, the flag does not match.
00865307105
WCheck the target volume number.The boot device and the T-VOL
(Secondary Volume) do not match in the
00865407105
Add Pair (Create Pairs), Resync Pairs,
or Delete Pairs command.
WCheck the contents, then retry the operation.An invalid secondary SSID is specified
for the Add Pair (Create Pairs) or Resync
Pairs command.
00865507105
WCheck the contents, and retry.An invalid secondary SSID is specified
for the Delete Pairs or Split Pairs
command.
00865607105
WPlease contact HP Technical Support.The Swap&Freeze option cannot be
specified, because the mode 80 is on.
00865707105
WDelete the Compatible FlashCopy pair or
Compatible FlashCopy SE pair, or specify another
volume.
The command has been rejected,
because the specified S-VOL (Primary
Volume) is being used as a volume of a
00869607105
Compatible FlashCopy pair or a
Compatible FlashCopy SE pair.
WDelete the Compatible FlashCopy pair or
Compatible FlashCopy SE pair, or specify another
volume.
The command has been rejected,
because the specified T-VOL (Secondary
Volume) is being used as the volume of
00869707105
282 Messages (part code group 07nnn)