HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 66 Error codes (part code 07105) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
iClose the message box.There is sufficient shared memory to
create 4096 pairs, and the initial
storage system setup is complete.
00854107105
EPlease contact HP Technical Support.Failed to complete the initial shared
memory setup.
00854207105
EPlease contact HP Technical Support.The shared memory size is different.00854307105
WCheck the contents, and retry.16 Mbytes of shared memory is
available.
00854407105
EPlease contact HP Technical Support.A power supply failure is detected.00854507105
WRetry the operation with power ON.The command was rejected. The PS OFF
is in progress.
00854607105
EPlease contact HP Technical Support.A data transfer failure is detected (CHA).00854707105
EPlease contact HP Technical Support.A data transfer failure is detected (DKA).00854807105
WYou cannot execute the operation for the volume
which is not implemented.
The S-VOL (Primary Volume) is not
implemented.
00854907105
EThe command has been rejected,
because the specified S-VOL (Primary
00855007105
• Restore the blocked volume, then retry the
operation.
Volume) is blocked or used as a system
disk.
• The system disk cannot be specified as an
S-VOL. Specify another volume.
WWait until the volume is formatted, and retry the
operation.
The S-VOL (Primary Volume) is being
formatted.
00855107105
WAs the S-VOL, specify a volume that is not used
as a command device.
This volume cannot be specified as an
S-VOL (Primary Volume) because it is
used as a command device.
00855207105
WYou cannot execute the operation for the volume
which is not implemented.
The T-VOL (Secondary Volume) is not
implemented.
00855307105
WThe command has been rejected,
because the specified T-VOL (Secondary
00855407105
• Restore the blocked volume, then retry the
operation.
Volume) is blocked or used as a system
disk.
• The system disk cannot be specified as a
T-VOL. Specify another volume.
WWait until the volume is formatted, and retry the
operation.
The T-VOL (Secondary Volume) is being
formatted.
00855507105
WRelease the command device, then retry the
operation.
This volume cannot be specified as an
T-VOL (Secondary Volume) because it is
used as a command device.
00855607105
WYou cannot execute the operation for the volume
which is not implemented.
The volume is not implemented.00855707105
WThe command has been rejected,
because the specified volume is blocked
or used as a system disk.
00855807105
• Restore the blocked volume, then retry the
operation.
• The system disk cannot be specified as a
reserved volume. Specify another volume.
WWait until the volume is formatted, and retry the
operation.
The volume is being formatted.00855907105
WSpecify a volume that is not used as a command
device.
This volume cannot be specified because
it is used as a command device.
00856007105
Part code 07105 277