HP XP P9000 Remote Web Console Messages (AV400-96604, January 2014)

Table 65 Error codes (part code 07010) (continued)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
Do you want to continue this operation?
WClick [OK], then continue the operation.Information was updated by other users.
The list will scroll to the top.
06610207010
WChange the number of pairs or volumes displayed
in Preview to 16,384 or less.
The maximum number of Pairs or
Volumes that can be displayed in the
06656007010
Preview List is 16,384. Change the
number of pairs or volumes that is
displayed in the Preview List to 16,384
or less.
WChange the status of the excluded pair. Pairsplit
operation cannot be executed from Remote Web
Console, if the specified pair is a Snapshot pair.
Some pairs are excluded from the pairs
to be set, because pairs in invalid status
for Pairsplit operation or Snapshot pair
is included in the specified pairs.
06902507010
Part code 07105
Table 66 Error codes (part code 07105)
Severity LevelRecommended ActionError MessageError
Number
Part
Code
EIf this problem persists, please contact HP
Technical Support.
An error occurred during SVP
processing.
00509907105
WPlease contact HP Technical Support.An internal logic error occurred.00562507105
WRelease the write-protection by Volume Retention.The specified volume cannot be used
because it is write-protected by Volume
Retention.
00562607105
WWait a while, and retry the operation.Processing in progress. Please wait for
a while, and then retry the operation.
00650207105
WWait a while, and retry the operation.The volume status is being changed to
simplex.
00650307105
WExecute one of the following:The command has been rejected,
because the specified volume was
00652007105
• Change the attribute of the Security Group so
that the Security Group can specify T-VOL or
reserved volume.
registered in the Security Group that
cannot specify T-VOL (Secondary
Volume) or reserved volume.
• Remove the volume specified from the Security
Group.
WVerify the error factor in another setting and then
retry the operation.
The setting process has not been
executed because there is no error in
00653707105
this setting, but an error in another
setting.
EIf this problem persists, please contact HP
Technical Support.
This error code is not registered.00731007105
WAdd shared memory or confirm whether the
necessary program product key is installed.
Sufficient amount of shared memory is
not installed or the program product is
not installed.
00850007105
WWait a while, and retry the operation.The command has been rejected,
because the command specified last time
is being processed.
00850107105
274 Messages (part code group 07nnn)